Table of Contents
Advertisement
1.2 Placement
The appliances have been designed to be installed indoors� They
cannot be used outdoors and cannot be exposed to atmospheric
agents�
The place designated for the installation of the oven must have a
rigid, level and horizontal surface, which must be able to safely support
the weight of the device/support assembly and the load at maximum
capacity�
The appliance must be transported to the place of installation packed
on the wooden pallet�
The oven must be handled using
precautions that it does not overturn� Also at the end of its
life span the oven must be loaded onto a pallet and handled
with great care in order to prevent the hazard of overturning�
The appliance must be placed in a
suitably ventilated room to prevent
the
excessive
harmful substances in the air�
All
of
the
packaging are compatible with the
environment, they can be stored
without danger or be disposed of
according to local regulations�
The oven must be level: to adjust
the height of the levelling feet, use
a spirit level, as indicated in Fig. 1�
Unevenness or inclinations of a
certain degree can compromise the
operation of the oven�
Remove the entire protective film from the external panels of the
appliance, detaching it slowly to remove all traces of adhesive�
Make sure that all openings and holes designed for heat intake/discharge
are not obstructed�
The oven should be installed exclusively on a stable support�
Remove the packaging from the appliance and make sure it is intact�
Position it in the place of use, taking care not to lace it on top of or
against walls, bulkheads, partition walls, kitchen furniture or coatings in
inflammable material.
accumulation
materials
used
a pallet truck, taking all
of
for
-
+
-
+
Fig. 1
9
Advertisement
Table of Contents
