Using Headphones (Not Included) - Bush NE-3313 Instruction Manual

Using your DAB/FM Digital Radio
Let's get started
2. Use the TUNNING (◄) or (►)
buttons until 'Sleep' is shown in
the display and press the SELECT
button to accept.
3. The display will now show 'Set
sleep time?' and the current sleep
status (e.g. fig. 17).
4. Use the TUNNING (◄) or (►) buttons until the preset times in
the sequence below (fig.18). When the sleep interval of choice is
shown, press the SELECT button to set.
5. The sleep timer is now activated
6. To cancel the sleep timer, press the MENU button and follow the
directions above until 'Sleep off' appears in the display.
7. To check the sleep timer status, follow steps 10.1 &10.2 above and
the sleep interval remaining will be displayed.

USING HEADPHONES (not included)

A stereo headphone jack has been provided so that the set can be
used without disturbing others. Plug in the headphones at the point
marked ' ' on the back of the radio and adjust the listening volume
to your chosen level. Excessive sound pressure from earphones and
headphones can cause hearing loss. The speakers will not operate
when earphones are fitted.
30
Using your DAB/FM Digital Radio