Change The Mode; Using Headphones; Connect To A Bluetooth Device - Bush DAB30 Instruction Manual

Getting to know your DAB/FM Radio with
Bluetooth
You'll be up and running in no time
6. Set date is displayed and the day will flash. Use the Tune control to scroll and press to
select the day, month and year, using the same method as you used to set the time.
When you confirm the correct date. 'Time Saved' is displayed and the display returns
to <Set Time/Date>.
You can now use the Tune control to scroll and press to select, the same method as
you did to set the time and date, to change the settings for:
12/24 hour clock display. The date format, DD-MM-YYYY or MM-DD-YYYY and to auto
update the time from the DAB signal, FM signal, DAB or FM signal or no update.

Change the mode

Press and release the Mode button to change between DAB, FM and Bluetooth modes.
Please check the display, which will confirm the mode.

Using headphones

You can connect headphones with a 3.5mm plug (not included) to your radio. The stereo
headphone socket can be found on the back of the radio at the bottom. When you
have headphones connected the radio speakers are switched off and all sound is via the
headphones.
Note: Always keep the volume within reasonable limits.

Connect to a Bluetooth device

Check that your Radio is in Bluetooth (BT) mode. If you are not already in BT mode, press
and release the Mode button on the front of the radio until you are in BT mode (check the
display). A tone will sound and 'Bluetooth' will be displayed, following by 'Searching' , whilst
your product searches for Bluetooth devices. If a device is already connected (paired) with
your radio, 'Connected' will be displayed on the second line of the display.
18
Getting to know your DAB/FM Radio with Bluetooth
Getting to know your DAB/FM Radio with
Bluetooth
You'll be up and running in no time
In Bluetooth (BT) Mode:
1. 'Searching' will flash on the second line of the display.
2. On the device that you would like to connect to your radio via Bluetooth (e.g. iPhone/
iPad/Android/other phone/Tablet/Computer), turn on Bluetooth connectivity and
ensure that it is 'discoverable' .
Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.
3. Select to 'Add new device' , if necessary.
Note: Some products will automatically search for a new device and so the 'Add new
device' option is not available.
4. When found, your radio will be displayed as 'BUSH BT DAB' . Select the device name to
begin pairing.
5. When pairing is complete 'Searching' will stop flashing in the display and 'Connected'
will be displayed.
6. Now that you have paired your device with the radio, it will connect to it when it is
within range, which is about 10 metres or less (33 feet or less), line of sight.
7. Your device will remain paired with the radio unless you decide to disconnect or
'unpair' it.
Note: If your device should be come unpaired for any reason, follow the steps above
to 'pair' it again. You can press and hold the
pairing process.
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Getting to know your DAB/FM Radio with Bluetooth
on the Radio to restart the Bluetooth
19