Ratio Electric SMART BOX Manual page 28

28
In the setup LOAD BAL you can choose between:
SETUP CHG MODE
<- DISABLED ->
SETUP CHG MODE
<- SLAVE 1 ->
You can change the setup by pressing the left or right arrow button. After your
choice has been made confirm by pressing the middle button.
You can only use load balancing in SMART mode.
3 SETUP I-MAX HOME
Here you can set the maximum available current of your house. To set MAX Mains
current you can choose between 10A and 99A.
This setup is available in SMART mode.
4 SETUP I-MIN
SETUP <- I-MIN ->
Here you can set the minimum charging current.
You can choose between 6A and 16A with steps of 1A.
The standard setting is 6A.
To make your choice please use the left or right arrow
button.
To confirm press the middle button.
5 SETUP I-MAX
SETUP
<- I-MAX ->
Here you can set the maximum charging current for the
EV. You can choose between 10A and 32A with steps of
1A.
To make your choice please use the left or right arrow.
To confirm press the middle button.
www.ratio.nl
SETUP CHG MODE
<- MASTER ->
SETUP CHG MODE
<- SLAVE 2 ->
SETUP CHG MODE
<- SLAVE 3 ->