Ratio Electric SMART BOX Manual page 23

PLEASE NOTE:
5. Open bottom cover of the Charge
Station (5 screws – see picture).
Carefully brake out required cable
opening for incoming power cable
and charge cable.
Use supplied M25 cable gland to
fix power cable from the bottom.
Use supplied grommet to fix
power cable from the back.
Use supplied M25 cable gland to
fix charge cable.
6. Use 4 wood screws M4,5x35mm to mount Charging Station on the wall.
The charging station should be installed between 0,80m and 1,20m from
bottom to the ground.
7. Connect in-coming power to the left
terminal block.
Single Phase:
L1=Brown
N= Blue
Earth=Green/Yellow
3 Phase:
L1=Brown
L2=Black
L3=Grey
N=Blue
Earth=Green/Yellow
All charges include an AC (> 30mA) and
DC (> 6mA) residual-current-detection.
Always place a type A RCD and the MCB
(or combination unit) in the electrical
cabinet.
ENGLISH 23
Fixed cable
SMART BOX / EV050
Outlet