Etm System Components; Axon Flex Etm; Etm Pucks - Taser AXON Flex User Manual

5 Battery LED – When pressed, momentarily indicates the remaining battery capacity only (it does not
indicate the operating mode).
Battery LED
Green
Yellow
Red
When you turn the controller on, all LED lights turn solid red until the system is ready to use. Then the
Operation LED blinks green (BUFFERING mode) and the Battery LED goes out.
6 Battery Button – When pressed, momentarily indicates the remaining battery capacity only (it does not
indicate the operating mode).
Pressing buttons causes the AXON Flex system to emit audio alerts (beeps) to indicate system actions. See
Chapter 12: Audio Prompts for more information.

ETM System Components

AXON Flex ETM

The ETM can be placed on a table or mounted on a wall. It is designed to upload data from the camera to the
EVIDENCE.com website and recharge the controller.
ETM System Components

ETM Pucks

An ETM has 12 bays; each bay accepts a fixture called a puck. There are two different puck designs; one for the
camera and another for the controller. An ETM is shipped with 6 camera pucks and 6 controller pucks installed
7
Chapter 2 Hardware
Controller Status
The Battery is Fully Charged.
The Battery Capacity is 20–40 Percent.
The Battery Capacity is LessThan 20 Percent.