Table of Contents
Advertisement
Audio Prompts
The AXON Flex system emits beeping sounds called audio prompts to notify you of the system status. These
audio prompts usually occur after you perform an action with the AXON Flex system.
NOTE: The camera must be connected to the controller for audio prompts to be heard. If the camera and
controller are connected and you still do not hear the audio prompts, check the camera's volume.
Action
Turn the Controller On.
Double-Press the Event Button to Start the Event
Mode.
The System is Recording.
Press the Battery Button while the Camera is
Recording.
Press and Hold the Event Button to Stop
Recording.
Turn the Controller Off.
The Battery is at 20 Percent Capacity or Lower.
The System is in Buffering Mode.
Cable Disconnect (The Camera Will Shut Down).
51
Audio Prompt
One Beep
Two Beeps
Two Beeps Sound Every Two Minutes
Two Beeps
One Beep
One Beep
Four Quick Beeps
No Beeps
One Beep.
12
Advertisement
Table of Contents
