Wired Networks - Canon PIXMA Q T 1 0 8 5 1 V 0 1 Getting Started

wireless network with
a single access point
d
Confirm that a checkmark appears next to the selected device, then
click Exit.
Wi-Fi router
Congratulations! You are finished with the setup.
Go to "Start Using Your MX860!" on page 37.
28
wireless network with
multiple access points
(example: Airport Extreme and Airport Express)
Wi-Fi router
Wi-Fi
router
wired network connecting
with an Ethernet cable

Wired Networks

If you will be connecting your MX860 to a wired LAN (Local Area
Network) using an Ethernet cable, follow the steps below.
1
Make sure the MX860 is ready
Ensure the MX860 is connected to your computer
with the USB cable and is powered on
You will need the USB cable only for the initial network
setup. Once your MX860 is connected to your network, the USB
cable is no longer needed.
2
Set the Network Connection Type
The MX860 is set at the factory to connect to a wireless (Wi-Fi) network.
To connect to a wired network using an Ethernet cable, change the
network connection type from the MX860 panel.
a
On the MX860, press the
b ◄ or ►
Use the button to select Settings, then press the
c Device Settings, then press the
Select
router
Menu
button.
OK
OK
button.
button.