Set Up To Receive Faxes - Canon PIXMA Q T 1 0 8 5 1 V 0 1 Getting Started

7
Look at the third printout
Repeat step 3 for columns a to j.
8
OK
Press to complete print head alignment
The Standby screen will display when print head alignment
is complete.

Set Up to Receive Faxes

If you are not using your MX860 as a fax, go to "Set Up the Software"
on page 15.
1
FAX
Press the button
2
Press the Menu button
FAX button
14
Menu button
3
Select Receive mode settings
Use the ◄ or ► button to select Receive mode settings, then press OK
4
Select the receive mode
Use the ▲ or ▼ button to select a receive mode, then press the OK
button.
Select a receive mode according to your needs.
● When you receive mainly faxes and sometimes voice
calls: Select FAX priority mode.
● When you have a dedicated telephone line for fax use
only: Select FAX only mode.
● When you receive mainly voice calls and sometimes
faxes: Select TEL priority mode.
● When you subscribe to a ring pattern detection service provided
by your telephone company, and you want to receive a fax
only if the machine detects the pattern for fax: Select DRPD
(Dictinctive Ring Pattern Detection).
5
When the FAX menu returns, press the
For details on fax settings and how to change them, refer
to the on-screen manual: Basic Guide.
Back button