Page 1
Form - PMPVH2365 - 001 Poseidon Victim Harness PVH2365 (Super Nappy Style) User's Manual – Leaders in Aviation and Maritime Life Support Products...
Copyright & Trademark Notice Product Warning Levels of Caution Product description General Precautions & Warnings Donning of the PVH2365 Drawing / Part Identification Maintenance & Care of Poseidon Products Service Life Work Area Storage Visual Inspection Repairs OEM Certified Inspection and Maintenance Requirements...
The PVH2365 Victim Harness is a unique ANZS1891.1 approved Super Nappy style harness. The PVH2365 is made entirely of FR materials with areas of hi-luminance colouring for ease of visual identification, and Stainless Steel 316 fittings. The design allows for use with patients of 40kg – through to 150kg, in a design which ensures the patient at all times is held securely and comfortably within the harness, as stipulated within ANZS1891.1...
AS/NZS 1891.4:2009 “Industrial fall- arrest systems and devices”. The PVH2365 is a Bare harness and is not allowed to be altered, amended or added to i n a n y f o r m , unless agreed to by manufacturer in writing and counter signed...
Page 5
Form - PMPVH2365 - 001 Intended Use: The Victim Harness may be used for: Hoisting of Front Rings joined together Limitations: The harness is only permitted to be used where the maximum allowable free fall distance is less than 2 meters All fall arrest connection points are labeled.
Page 6
Form - PMPVH2365 - 001 Only competent users who have received training should use this equipment. (Refer to the AS/NZS 1891-4: 2009 recommendations concerning selection, use and maintenance.) Personal energy absorbers that absorb energy by permanent deformation or destructive action must be discarded if that process has commenced.
Form - PMPVH2365 - 001 The following instructions for the use of the PVH2365 from this point forward are based on the User being certified for the Operations, that the item and its use, and has been stored correctly and packed in accordance with the...
Page 8
Form - PMPVH2365 - 001 6. Adjust shoulder straps to ensure a snug fit and that the victim will not slip out during a lift. 7. There are adjustments on the side of the of the harness to make it smaller or larger to cater for multiple victim sizes;...
Drawing – Part Identification: D Ring for Guideline only Not for Fall Arrest Shoulder Adjustments Right Ring Hoist fitting Left Ring Hoist fitting Adjustment Buckles for Girth Rear Grab Handle Crotch Ring Hoist fitting – Leaders in Aviation and Maritime Life Support Products...
Hang to dry the Harness in a well-ventilated area, which is free from direct sunlight. iii. To avoid mildew, hang dry the POSEIDON Harness after every use, and be sure not to stow the product away while damp. Treatment After Immersion 10.3.1...
The work area where inspection and maintenance of the POSEIDON Harness is performed should be smooth and flat, where the POSEIDON Harness will not snag, tear or otherwise be damaged and should also be cleared of all non-essential equipment and materials.
15 Repairs 15.1General 15.1.1 It is extremely important that damaged POSEIDON Harness is handled in accordance with the following repair requirements. Qualified repair personnel can perform some repairs, with adequate OEM Approved facilities. The manufacturer should do all major repairs, unless otherwise authorized by Poseidon NZ.
Page 13
The maintenance recorded has been carried out in accordance with the requirements of Aviation Rule Part 43 and in respect of that maintenance the component is released to service: Note: "Component" being Poseidon NZ made Victim Harness. – Leaders in Aviation and Maritime Life Support Products...
Need help?
Do you have a question about the PVH2365 and is the answer not in the manual?
Questions and answers