CREE LIGHTING Urban Series Quick Start Manual

Street lights

Advertisement

Models :
Urban lanterns
Light Source
codes
Kit Retrofit
LEA#
RKT#
U##

Disassembly Instructions

Light Source (LS)

N° DOC: DI053RLER0
Rev: 01
Power supply
codes
PH#
Warning: Before opening the appliance, remove voltage from the mains line
LS-EU
1.LED bars are not replaceable by the end user by construction; only a technical operator at the production site can repla-
ce these bars. In order not to compromise the functionality and performance of the luminaire, the light sources used in it
can be handled only in environments protected from possible contamination of dust and / or external chemical agents and
with safety measures to prevent possible electrostatic discharge caused by the handling of the same.The connection of the
light sources to the body of the luminaire is also made by means of double-sided thermo-conductive which, if not properly
installed, could cause incorrect thermal management of the light sources.
2
1
4
5
6
Includes: Urban Artistic, Urban Contemporary, Urban Modern, Urban Circular, Retroftit kit, Square LED
Tools:
LS-CA
1.Follow points a-b-c-d of the PS-EU paragraph
2.Unscrew screws 2 of the optics 1
3.Remove gasket 3
4.Unscrew grains 4 that fix LED bar 5 on plate 7
5.Remove LED bar 5 without damaging the thermal pad 6 and taking the
3
utmost care not to bend or damage the LED bars
7
Urban Series
Street Lights
DISASSEMBLY INSTRUCTIONS
Latest release date: 18/11/2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Urban Series and is the answer not in the manual?

Questions and answers

Summary of Contents for CREE LIGHTING Urban Series

  • Page 1 Urban Series Street Lights Includes: Urban Artistic, Urban Contemporary, Urban Modern, Urban Circular, Retroftit kit, Square LED DISASSEMBLY INSTRUCTIONS Models : Tools: Urban lanterns Light Source Power supply codes codes Kit Retrofit LEA# RKT# Warning: Before opening the appliance, remove voltage from the mains line...
  • Page 2 Disassembly Instructions PS-EU Power Supply (PS) a.Detach the retrofit plate 8 from the lantern structure (if any) by For End User (EU) unscrewing the four screws 9 b.Unscrew 10 screws to open wiring compartment 11 c.Unscrew the cable press 12 d.Disconnect the LED plate cables connected to driver 13 on its terminal block 14 e.Unscrew screws 17 between the driver plate 15 and the plate...
  • Page 3 For more information on available collection facilities, contact your local waste collection service or the shop where you bought this appliance. © 2021 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree® and the Cree logo are registered trademarks of Cree, Inc.

This manual is also suitable for:

CircularArtistic

Table of Contents