Inscape Data Link Power LPS1000 User Manual
  1. Manuals
  2. Brands
  3. Inscape Data Manuals
  4. Switch
  5. Link Power LPS1000
  6. User manual

Inscape Data Link Power LPS1000 User Manual

Adjustable voltage 5-port poe switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Link Power™ ™ ™ ™ LPS1000 Adjustable
Voltage 5-Port PoE Switch
USER MANUAL
Inscape Data Corporation
1611 South Main Street
Milpitas, CA 95035
U.S.A.
Updated 08/25/2009

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Link Power LPS1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Inscape Data Link Power LPS1000

Summary of Contents for Inscape Data Link Power LPS1000

  • Page 1 Link Power™ ™ ™ ™ LPS1000 Adjustable Voltage 5-Port PoE Switch USER MANUAL Inscape Data Corporation 1611 South Main Street Milpitas, CA 95035 U.S.A. Updated 08/25/2009...
  • Page 2 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Certification Inscape Data Corporation certifies that this product met its published specifications at time of shipment from the factory. FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3 Inscape Data’s reseller, commencing not more than ninety (90) days after original shipment by Inscape Data), and continuing for a period of the longer of (a) ninety (90) days or (b) the period set forth in the warranty card accompanying the Product (if any), the Hardware will be free from defects in material and workmanship under normal use.
  • Page 4 A COURSE OF DEALING, LAW, USAGE, OR TRADE PRACTICE, ARE HEREBY EXCLUDED TO THE EXTENT ALLOWED BY APPLICABLE LAW AND ARE EXPRESSLY DISCLAIMED BY INSCAPE DATA, ITS SUPPLIERS AND LICENSORS. TO THE EXTENT AN IMPLIED WARRANTY CANNOT BE EXCLUDED, SUCH WARRANTY IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD.
  • Page 5 RMA request and the RMA item. Actual delivery times may vary depending on Customer location. Inscape Data reserves the right to refund the purchase price as its exclusive warranty remedy.
  • Page 6 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Inscape Data Corporation, 1611 South Main Street, Milpitas, CA 95035 USA IMPORTANT: PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY. DOWNLOADING, INSTALLING OR USING INSCAPE DATA OR INSCAPE DATA-SUPPLIED SOFTWARE CONSTITUTES ACCEPTANCE OF THIS AGREEMENT.
  • Page 7 Customer and used for Customer’s internal business purposes. No other licenses are granted by implication, estoppel or otherwise. For evaluation or beta copies for which Inscape Data does not charge a license fee, the above requirement to pay license fees does not apply.
  • Page 8 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch secrets of Inscape Data or its suppliers or licensors, including but not limited to the specific internal design and structure of individual programs and associated interface information. Except as otherwise expressly provided under the Agreement, Customer shall have no right,...
  • Page 9 United States (U.S.) and any other applicable countries’ laws and regulations. Customer shall comply with such laws and regulations governing export, re-export, transfer and use of Inscape Data Software and Technology and will obtain all required U.S. and Page 9 of 71...
  • Page 10 Inscape Data reseller, commencing not more than ninety (90) days after original shipment by Inscape Data), and continuing for a period of the longer of (a) ninety (90) days or (b) the warranty period (if any) expressly set forth as applicable specifically to software in the warranty card accompanying the product of which the Software is a part (the “Product”) (if any): (a) the...
  • Page 11 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch In no event does Inscape Data warrant that the Software is error free or that Customer will be able to operate the Software without problems or interruptions. In addition, due to the continual...
  • Page 12 CONSEQUENTIAL, INCIDENTAL, OR PUNITIVE DAMAGES HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY OR WHETHER ARISING OUT OF THE USE OF OR INABILITY TO USE SOFTWARE OR OTHERWISE AND EVEN IF INSCAPE DATA OR ITS SUPPLIERS OR LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
  • Page 13 For all countries referred to above, Customer agrees that the limitations of liability and disclaimers set forth herein will apply regardless of whether Customer has accepted the Software or any other product or service delivered by Inscape Data. Customer acknowledges Page 13 of 71...
  • Page 14 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch and agrees that Inscape Data has set its prices and entered into the Agreement in reliance upon the disclaimers of warranty and the limitations of liability set forth herein, that the same reflect an allocation of risk between the parties (including the risk that a contract remedy may fail of its essential purpose and cause consequential loss), and that the same form an essential basis of the bargain between the parties.
  • Page 15 Purchase Order or elsewhere, all of which terms are excluded. The Agreement has been written in the English language, and the parties agree that the English version will govern. © 2007, 2008, 2009 Inscape Data Corporation, All rights reserved. Page 15 of 71...
  • Page 16 Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument. Inscape Data Corporation assumes no liability for the customer’s failure to comply with these requirements.
  • Page 17 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Chassis Power Connection Before connecting or disconnecting ground or power wires to the chassis, ensure that power is removed from the device. To ensure that all power is OFF, locate the circuit breaker on the panel board that services the device, switch the circuit breaker to the OFF position, and tape the switch handle of the circuit breaker in the OFF position.
  • Page 18 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch PRODUCT NOTES • This product requires one free USB port and Cable. • Keep the filler stub connected to the weatherproof port if not in use • Make note of your serial number, and MAC Addresses before installation.

  • Page 19: Table Of Contents

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch TABLE OF CONTENTS INTRODUCTION ............................21 ..............................21 VERVIEW ...........................22 AJOR EATURES ..........................23 ACKAGE ONTENTS HARDWARE INSTALLATION........................25 LPS1000 I ........................25 NTRODUCTION ........................27 ONTROL ANEL AYOUT ............................28 OWER NPUTS .......................29 THERNET URGE UPRESSION ............................30 ARTH ROUND ....................30 IRING AND SSIGNMENT...
  • Page 20 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 3.3.4 Portrst ..............................30 3.3.5 Default ...............................30 3.3.6 Net..............................30 3.3.7 User ..............................30 3.3.8 Quit ..............................30 3.3.9 Reset..............................30 .............................30 NTERFACE 3.4.1 Connecting to the Web Interface ......................30 3.4.2 Web Status............................30 3.4.3 PoE Control ............................30 3.4.4 System Reset............................30 TROUBLESHOOTING ..........................30 APPENDIX..............................30...

  • Page 21: Introduction

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 1 Introduction Inscape Data Corporation, the leader in outdoor network appliance is pleased to offer the LinkPower™ LPS1000 Adjustable Voltage PoE Switch. Inscape Data Corporation was founded in 2003 and offers a full suite of turnkey solutions for long-range outdoor 2.4GHz, 5GHz, and IP-based video surveillance applications, including IP67/68 (Ingress Protection)-compliant all-weather IEEE802.11 a/b/g wireless systems, an Outdoor PoE Switch,...

  • Page 22: Major Features

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Major Features Features Description Remote PD Power Cycle Remotely Turn Power On and Off PoE Device Connected to the LPS1000 All Weather Enclosure** IP67 Compliant Enclosure Rating and Water Tight Connectors Based on Patent Pending Technology. Independent Port Voltage Adjustable DC PoE Voltage of 0VDC, 12VDC, 24VDC, 48VDC, Adjustment...

  • Page 23: Package Contents

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Package Contents Please look over your product package to check for the following items Page 23 of 71...
  • Page 24 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Included and Optional Accessories Page 24 of 71...

  • Page 25: Hardware Installation

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 2 Hardware Installation LPS1000 Introduction System Front, Side, and Bottom View LPS1000 System LED Function Description LAN 1 ~ 5 Power Device (PD) Link Light LPS1000 System Power Light Page 25 of 71...
  • Page 26 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Dimensions Page 26 of 71...

  • Page 27: Control Panel Layout

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Control Panel Layout The control panel layout consist of push button switches and status LEDs. The control panel interface is accessible by removing the LPS1000 bottom cover. The summary of LED, ports, and button are listed below. LPS1000 Control Panel View User Buttons and Ports Item No.

  • Page 28: Power Inputs

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Power Inputs The LPS1000 accepts 48VDC and/or 100 ~ 240V AC power input. The industrial power termination block provides secure and installation flexibility. The LPS1000 input voltage circuit will also accept dual power input. If dual power input is used for power redundancy, the LPS1000 power circuit will operate with internal power supply until the DC power input supply voltage is greater than the internal power supply.

  • Page 29: Ethernet Surge Supression

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Ethernet Surge Supression The LPS1000 is designed with durability and reliability. The built-in Ethernet Surge Suppressor is purpose built to protect Ethernet enabled electronics and equipment from lightning and harmful transient voltages. It is designed with low impedance and insertion loss to minimize data packet loss and information integrity as it travels across the lines.

  • Page 30: Earth Ground

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Earth Ground To ensure functional reliability, the Chassis Ground must be connected to the protective earth. Grounding your unit to a proper earth ground increases the handling of EMI, transient voltages, and electrostatic discharge. Must Ground the LPS100 to An Approved...

  • Page 31: Poe Port Wiring And Pin Assignment

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch PoE Port Wiring and Pin Assignment The LPS1000 is equipped with 5 Power over Ethernet (PoE) injectors with 30 Watts power forwarding capability in each port. Each PoE port can handle a 10 Base-T or 100 Base-TX full or half-duplex modes with auto MDI/MDIX.
  • Page 32 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch PD Contact Pin Table RJ45 Conductor Pin # 802.3af Mode A 802.3af Mode B / Passive PoE* TX+, V+ TX-, V+ RX+, V- RX-, V- * Passive PoE Voltage Supported by LPS1000: 0VDC, 12VDC, 24VDC, 48VDC Page 32 of 71...

  • Page 33: Lps1000 Installation And Configuration

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch LPS1000 Installation and Configuration The LPS1000 may power up to five PD. Proprietary PD supporting Ethernet cable pin configuration of 4, 5 positive and 7, 8 negative will work with the LPS1000. Popular brands of IP physical security and IT networking equipment using proprietary 12VDC, 24VDC, and 48VDC are highly compatible.

  • Page 34: Poe Power Rating And Forwarding Specification

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 2.7.1 PoE Power Rating and Forwarding Specification This section describes power forwarding capabilities of the LPS1000. In IEEE 802.3af standards, it specifies 15.4 watts of power budget for a powered device system. In many applications, 15.4 watts is not sufficient to power the more demanding PoE equipment.
  • Page 35 USING INSCAPE DATA-SUPPLIED PRODUCT AND SOFTWARE CONSTITUTES ACCEPTANCE OF THIS AGREEMENT. IN NO EVENT SHALL INSCAPE DATA BE LIABLE TO YOU OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGE ARISING OUT OF THE USE OR INABILITY TO USE...

  • Page 36: Before You Start

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 2.7.2 Before You Start Review the package contents, system requirements, and application example before proceeding with Section 2.7.3 Installation Procedure. Package Contents Link Power LPS1000 Adjustable PoE Switch • Read Me First Document • Quick Install Guide •...
  • Page 37 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Required Accessories Items Specification Notes Ground Wire 16 AWG Copper Wire Attached to backside of the LPS1000 (Minimum) and appropriate common Earth Ground. Product damage caused by improper grounding is not covered under warranty! Torque Wrench 20kgf-cm or 1.44 All nuts and bolts shall not be tightened...

  • Page 38: Installation Procedure

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 2.7.3 Installation Procedure The installation procedure offers two options: 1. Out of Box Installation: For Out of Box Installation, if there will be no change to IP address/Network Mask/Default Gateway, User Name, Password 1.) Hardware Installation –...
  • Page 39 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 2.7.4 Hardware Installation The LPS1000 System Includes Two Types of Connector Kits, i.e., (1). Conduit Piping and (2). Weatherproof Cable Connector Kit. Step 1: Based on Your Installation Requirements, Select and Assemble the Appropriate Weatherproof Connector Kit to the Bottom Panel Cover (Option A, B, or C) and Leave Bottom Panel Cover Open Until the Final Step In Section 1.3: Mounting the LPS1000.
  • Page 40 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch PLEASE TAKE A MOMENT TO WRITE DOWN YOUR POE CONFIGURATION HERE. IF PD IS PLUGGED IN TO THE WRONG LAN PORT, THE PD MAYBE PERMANENTLY DAMAGED. LAN Port LAN 1 LAN 2 LAN 3 LAN 4 LAN 5 Voltage...
  • Page 41 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Step 9. You May Use the Following Default Web Configuration Values to Access the LPS1000 by Using either Microsoft Internet Explorer or Mozilla Firefox, recommended. Item Default Value IP Address 192.168.1.30 Subnet Mask 255.255.255.0 Default 192.168.1.1...
  • Page 42 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 2.7.5 Console Configuration Step 1. Connect the USB Cable from a PC to the LPS1000. Step 2. Follow Your Operating System Prompts for USB Driver Installation If Needed. Step 3. Use Hyper Terminal or Equivalent Software to Access the LPS1000 Console. Use the following Com Port Settings: Baud Rate 9600...
  • Page 43 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Step 8. When Finished with Console Configuration, Unplug the USB Cable and Press Reset Button. Step 9. To Test the IP Address Configuration, Connect a RJ-45 Network Cable From the Computer to an Available LPS1000 No Voltage LAN Port Step 10.
  • Page 44 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 2.7.6 Mounting the LPS1000 The LPS1000 may be mounted on a wall or pole. Review the mounting bracket diagram below for more details. Step 1: Securely Fasten the Bottom Panel Weatherproof Cover and Connector Set. Option B, as an Example, Rubber Grommet Shown.
  • Page 45 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Step 4: For Wall Mount, Measure and Mark the Location on the Wall. Secure the LPS1000 onto the Wall. Your installation is now complete. For detailed information regarding the LPS1000 configuration, please refer to the User’s Guide CD-ROM.

  • Page 46: Poe Injector And Cable Length Consideration

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch PoE Injector and Cable Length Consideration It is recommended to check the PoE equipment PoE cable length specification prior to installation to ensure correct power is delivered to the PoE equipment. Using the wrong voltage and/or exceeding PoE cable length may lower the products performance or in most cases damage the product.

  • Page 47: Management And Setup

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 3 Management and Setup The LPS1000 provides local and web browser monitor interface to easily configure and monitor the LPS1000 adjustable voltage PoE switch. Local Management and Setup Local management consists of push buttons and switches to access the core functionality of the LPS1000.

  • Page 48: Usb Management Console Os Driver

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch USB Management Console OS Driver In the event your operating system does not recognize the LPS1000 USB management console, you may manually install the windows xp/2000/2003/vista USB driver included with the product CDROM. Execute the windows USB driver installation file. Once the USB driver is installed onto your Windows operating system, plugging in the LPS1000 will automatically enable the COM port.

  • Page 49: View

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 3.3.2 View The “View” command displays the following LPS1000 System Information: Firmware Version, MAC Address, IP Address, Subnet Mask, Default Gateway, Board Temperature, Heartbeat Count, and Port 1 Through Port 5 Name and Voltage. 3.3.3 Write The “Write”...

  • Page 50: Reset

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 3.3.9 Reset The “Reset” command performs a cold system reset. This command does not restore the system to factory default values and will disable the USB management console. Please reference to section 2.7.3. for instruction on logging back into the LPS1000 USB management console.

  • Page 51: Web Interface

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Web Interface The LPS1000 offers IP addressable web monitor function. This allows remote access over the internet to the LPS1000 to monitor and view the LPS1000 status, remotely power cycle each port, and remotely system reset the LPS1000 and all 5 ports. 3.4.1 Connecting to the Web Interface 1.

  • Page 52: Web Status

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 3.4.2 Web Status Here is a table with details of each item listed in the status page. Item Description LPS1000 F/W Version The firmware version installed on the LPS1000 MAC Address The MAC Address of the LPS1000 IP Address The IP Address of the LPS1000 Subnet Mask...

  • Page 53: Poe Control

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 3.4.3 PoE Control You may monitor port voltage and link status as well as execute port restart. Port restart will power cycles the port and the connected power device. The table below references the status of each port.

  • Page 54: System Reset

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 3.4.4 System Reset The system reset page will perform a system reset on the LPS1000 and power cycle every power device connected to the LPS1000. Item Description System Reset Button This Button Will Perform System Reset of the LPS1000, Allowing a Power Cycle of all Power Device Connected to the LPS1000.

  • Page 55: Troubleshooting

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 4 Troubleshooting How do I configure TCP/IP settings on my computer? I Typed the IP address of LPS1000, but an error message says “The page cannot be displayed.” How can I get into the LPS1000 remote monitor web page? In my network’s IP is different than the PoE switch’s range, what should I do? My 802.3af power device does not power on when I plug the device into the LPS1000.

  • Page 56: Appendix

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch 5 Appendix The following section references LPS1000 essential information. Default & Display Values Item Values User Name root Password root IP Address 192.168.1.30 Subnet Mask 255.255.255.0 Default Gateway 192.168.1.1 LAN 1 Name LAN 2 Name LAN 3 Name LAN 4 Name LAN 5 Name...

  • Page 57: Power Over Ethernet Technology

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Power Over Ethernet Technology Power over Ethernet (PoE) is an evolving technology designed to deliver power and data on an Ethernet cable at the same time. Modeling after telecommunication systems which supply power to telephones, PoE powers network devices without the need of an AC electrical outlet. By eliminating the power cord infrastructure, PoE technology simplifies wiring and deployment providing convenience and benefits to enterprise, commercial, industrial, and residential applications.
  • Page 58 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Pre-standard PoE These types of PoE devices deliver power over the spare pairs (pins 4, 5, 7 and 8) of a CAT3, CAT5, CAT5E or CAT6 type Ethernet network cable. It delivers the voltage across the spare pairs of an Ethernet cable.
  • Page 59 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Let’s look at the Inscape Data AirGoggle NVC300 Fixed Dome IP Video Camera as a planning example. The NVC300 PoE power requirement is 8.4 watts and minimal voltage of 7 VDC. If using a 12VDC passive PoE injector with 50 meters of CAT5e cable, the camera would receive 8.4 watts of power at 6VDC.
  • Page 60 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Powered Device (PD) is a device that receives power from PSE. More and more networks today have attachments such as IP phones, wireless LAN access points, and IP cameras all designed as PDs. Due to the different power requirements needed by various PDs, IEEE802.3af defines an option to classify PDs into classes according to their power consumptions.
  • Page 61 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch The introduction of network devices that require more than 15.4W such as notebooks, video phones, PTZ IP cameras, and WiMax base stations, has compelled the IEEE 802.3 workgroup to develop a new PoE standard that can deliver even more power than defined in the IEEE 802.3af standard.
  • Page 62 PIS200 2-port PoE injector with surge suppression built-in. The LinkPower LPS1000 5-port adjustable voltage PoE switch is an all-in-one end-span PSE type of equipment. Inscape Data Corporation’s SB54 all-weather dual band access point / bridge and NVC series IP video camera are examples of PD devices.
  • Page 63 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Applications PoE offers great cost savings and flexibility in deploying equipment. Applications currently utilizing PoE technology range from, but not limited to, the following: IP Telephones • Printers • Wireless Peripherals • Field Transducers and Sensors •...
  • Page 64 • PD Lock-Up • Inscape Data Corporation, the leader in wireless and IP video systems’ introduction of the LinkPower LPS1000 Adjustable Voltage Outdoor PoE Switch based on Inscape Data’s patent-pending proprietary technology tackles the challenges of outdoor PoE applications. The LPS1000 is a unique and powerful outdoor 5-port Ethernet Switch with an adjustable voltage feature.
  • Page 65 Outdoor PoE PSE and PD face diverse challenges of diverse power systems and extreme operating environments. By providing flexible PD voltage support and remote restart capability, Inscape Data Corporation’s LinkPower LPS1000 overcomes practical deployment problems in outdoor environments and brings a new concept to outdoor PoE switching.

  • Page 66: Specifications

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Specifications LPS1000 IEEE 802.3, IEEE802.3u, IEEE 802.3af, IEEE 802.1Q, IEEE 802.1p, 802.3x, IGMP Technology Standard v1,v2,v3 Switch Technology Store and Forward Technology with 1.2Gbps Internal Switch Fabric Aggregate System Throughput 500 mbps MAC Address 2K MAC Address Table Packet Buffer 384 kbits...

  • Page 67: Glossary

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Glossary 802.3af - An IEEE standard for powering network devices via Ethernet cable. Also known as "Power-over-Ethernet," it provides 48 volts over 4-wire or 8-wire twisted pair. The 8-wire cable uses one twisted pair for the power, while the 4-wire transmits the power over the same pair as the data, but uses different frequencies.
  • Page 68 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch common transmission medium. Firmware - The programming code that runs a networking device. Fragmentation -Breaking a packet into smaller units when transmitting over a network medium that cannot support the original size of the packet. Gateway - A device that interconnects networks with different, incompatible communications protocols.
  • Page 69 LinkPower ™ LPS1000 Adjustable Voltage PoE Switch SOHO (Small Office/Home Office) - Market segment of professionals who work at home or in small offices. Spread Spectrum - Wideband radio frequency technique used for more reliable and secure data transmission. SSID (Service Set Identifier) - Your wireless network's name. Static IP Address - A fixed address assigned to a computer or device that is connected to a network.

  • Page 70: Inscape Data Sales And Support Offices

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Inscape Data Sales and Support Offices For more information about Inscape Data Corporation products, applications, support, and for a current sales office listing, visit our web site: http://www.inscapedata.com U.S. Headquarters Here’s how to reach us if you’d like to place an order or if you have questions or concerns...

  • Page 71: Revision History

    LinkPower ™ LPS1000 Adjustable Voltage PoE Switch Revision History Version Date Description Rev 0.1 08/25/2009 First Revision Based on Firmware 2.8.5 Rev 0.2 08/26/2009 Add Few Items Page 71 of 71...

Table of Contents