Install The Ink Tanks - Canon PIXMA iP4820 Series Getting Started

4
Tilt the ink tank, then insert it
under the label and against
the back end of the slot.
Make sure that the color of the
label matches the ink tank.
5
Press the PUSH mark on the
ink tank firmly until it clicks.
When the installation is
completed properly, the Ink
lamp lights red.
6
Install all the other ink tanks
in the same way according to
the color order indicated on
the label.
7
F
Close the Top Cover (E).
Make sure the Inner Cover (F) is closed.
• The POWER lamp (green) (G) flashes for about 5
minutes, then stays lit. Wait until the lamp stays lit
and go to the next step.
• If the Alarm lamp (H) flashes orange, make sure
that the Print Head and the ink tanks are correctly
installed.

3 Install the Ink Tanks

E
G
H