Table of Contents
Advertisement
Steps
1. Connect the right fan cable to the system board.
2. Align the screw holes on the right fan (FAN1) with the screw holes on the system board and palm-rest and keyboard
assembly.
3. Replace the screw (M1.6x4) that secures the right fan (FAN1) to the system board and palm-rest and keyboard assembly.
4. Replace the two screws (M2x4) that secure the right fan (FAN1) to the system board and palm-rest and keyboard assembly.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Removing the left fan
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the left fan and provides a visual representation of the removal procedure.
30
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
