Table of Contents
Advertisement
Steps
1. Align the screw hole on the I/O board with the screw hole on the palm-rest and keyboard assembly.
2. Replace the three screws (M2x4) that secure the I/O board to the palm-rest and keyboard assembly.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following images indicate the location of the display cable and the display hinges and provide a visual representation of the
removal procedure.
38
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
