Table of Contents
Advertisement
Steps
1. Align the notch on the solid-state drive with the tab on the SSD2 slot.
2. Slide the solid-state drive into the SSD2 slot.
3. Using the alignment post, place the solid-state drive thermal bracket over the solid-state drive.
4. Align the screw hole on the solid-state drive thermal bracket with the screw hole on the system board.
5. Replace the screw (M2x4) that secures the solid-state drive thermal bracket and the solid-state drive to the system board.
Next steps
1. Install the
battery
2. Install the
base
cover.
3. Follow the procedure in
Fans
Removing the right fan
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the right fan and provides a visual representation of the removal procedure.
NOTE:
The fan depicted is for systems with a discrete graphics card, the fan for systems with an integrated graphics card
may appear different but installs in the same manner.
28
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
