Parameter
Data Eye
(Continued)
(Note1) This item is configurable when Aggressor Static Lane Control is set to Enabled.
(Note2) This item is configurable when Target Static Lane Control is set to Enabled.
Description
Aggressor Channel
– This item helps read the aggressors channels.
– Options available: Disabled, 1 Aggressor Channel, 3 Aggressor
Channels, 7 Aggressor Channels. Default setting is 1 Aggressor
Channel.
Aggressor Static Lane Control
– Enable/Disable the Aggressor Static Lane Control function.
– Options available: Enabled, Disabled. Default setting is Disabled.
Aggressor Static Lane Select Upper 32 bits
Aggressor Static Lane Select Lower 32 bits
Aggressor Static Lane Select ECC
Aggressor Static Lane Value
Target Static Lane Control
– Enable/Disable the Target Static Lane Control function.
– Options available: Enabled, Disabled. Default setting is Disabled.
Target Static Lane Select Upper 32 bits
Target Static Lane Select Lower 32 bits
Target Static Lane Select ECC
Target Static Lane Value
Worst Case Margin Granularity
– Options available: Per Chip Select, Per Nibble. Default setting is Per
Chip Select.
Read Voltage Sweep Step Size
– Options available: 1, 2, 4. Default setting is 1.
Read Timing Sweep Step Size
– Options available: 1, 2, 4. Default setting is 1.
Write Voltage Sweep Step Size
– Options available: 1, 2, 4. Default setting is 1.
Write Timing Sweep Step Size
– Options available: 1, 2, 4. Default setting is 1.
BIOS Setup
- 83 -
(Note1)
(Note1)
(Note1)
(Note1)
(Note2)
(Note2)
(Note2)
(Note2)