3-1
Removing and Installing the Chassis Cover
Before you remove or install the chassis cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove/install the chassis cover:
1.
Push button to unlock the handle.
2.
Pull the grip handle to open the panel cover.
3.
Slide the cover towards the rear of the system and then remove the cover in the direction indicated
by the arrow.
4.
Follow steps 1-3 in reverse order to re-install the top cover
3
Follow these instructions to remove/install the front bezel door:
1.
Press the latch on the top of the front bezel door. Then Tilt and lift up the door.
2
1
Pull
Push
2
1
Pull
Push
System Hardware Installation
1
- 23 -
1
1
1