3-1
Removing and Installing the Chassis Cover
Before you remove or install the chassis cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove/install the chassis side cover and front bezel:
1.
Remove the screw securing the chassis side cover.
2.
Slide the cover towards the rear of the system and then remove the cover in the direction indicated
by the arrow.
3.
Remove the front bezel.
4.
Remove the dummy cover.
5.
Remove the EMI shielding.
6.
Reinstall the front bezel.
7.
Follow steps 1-2 in reverse order to re-install the chassis side cover.
1
1
2
2
System Hardware Installation
- 22 -
Remove
5
Remove
6
4
3