Setting The Connection By Using The Wi-Fi Setup Tool (Microsoft Windows) - Kyocera ECOSYS M5521cdw Faq

Setting the Connection by Using the Wi-Fi Setup Tool
(Microsoft Windows).
To send the Wi-Fi settings configured in the Wi-Fi Setup Tool to
the machine, connect the computer with the machine locally.
The connection methods are wired connection via LAN cable
and wireless LAN connection (Wi-Fi Direct).
NOTE
+ Before using the Wi-Fi Setup Tool, connect your
computer to this machine locally with wired LAN
cable or Wi-Fi Direct.
To use Wi-Fi Direct, confirm that the Wi-Fi Direct
+
is enabled (Wi-Fi Direct is set to [On]) and Restart
Network from the operation panel, before your
computer will be connected to this machine with Wi-
Fi Direct.
To use a wired LAN cable directly connected to the
+
machine, the Auto-IP (Link-local) address will be
assigned to the machine and the computer. This
machine applies Auto-IP as the
default settings.
Configure the settings on the operation panel if your
+
computer supports WPS.
Wireless Connection setup by Using LAN Cable
Connect the printer with a computer.
1 Connect the printer with a computer via LAN cable when
the machine is powered on.
2 Turn on the computer.
IP address (link local address) of the machine and
computer is generated automatically.
Insert the DVD (if your computer is equipped with one) or visit
our web site and download the latest
Wi-Fi setup tool
https://www.kyoceradocumentsolutions.us/m5521
FAQs M5521cdw
NOTE
Installation on Windows must be done by a user
+
logged on with administrator privileges.
If the "Welcome to the Found New Hardware Wizard"
+
dialog box displays, select [Cancel].
If the autorun screen is displayed, click
+
[Run setup.exe].
If the user account management window appears,
+
click [Yes] ([Allow]).
Click [Accept].
Select Maintenance.
Wi-Fi Setup Tool > [OK].
17