Table of Contents
Advertisement
TROUBLESHOOTING
PROBLEM
No Green Light
Green Light Flashing
Amber or Red Light Flashing
No Air Flow
Not Enough Vapor
Flow Meter
Ball Sticking
Gauge Bouncing
Flow Meter Bouncing
High Pressure Reading
REDLINE TECHNICAL SUPPORT
RedlineDetection.com/support
TechSupport@RedlineDetection.com
+1 714-451-1411
Monday - Friday: 7:00 AM to 5:00 PM PST
SOLUTION
Check polarity
Ensure 12-Volt battery is fully-charged
Reconnect power cables
Power supply must not exceed 14 VDC
Connect to a fully-charged 12-Volt battery
Never use battery charger as power source
Open Circuit / internal component
Contact Redline Technical Support
Open the flow control valve
Check hoses are not kinked or pushed into
machine
Check Fluid Level
Open the flow control valve
Check hoses are not kinked or pushed into
machine
Clean Flow Meter
Drain Vapor Hose
Check hoses are not kinked or pushed into
machine
11
Advertisement
Table of Contents
