Testing For Leaks - Redline SMOKE PRO AIR COMPLETE 95-0051 Operation Manual

TESTING FOR LEAKS

4. TESTING WITH SMOKE
Push smoke test button to begin a 5-minute vapor cycle
VAPOR INDICATOR:
Red Light: Vapor is Generating
Flashing Red Light: See Troubleshooting (Pg 11)
No Light: No Vapor Generating
Turn Flow Control Knob counter-clockwise to release smoke / pressure
Flow Meter indicates flow and measures leak size
Use provided Halogen Inspection Light to locate leaks
Perform repair(s) as needed
5. TESTING WITH AIR-ONLY
Push Air-Only test button to begin a 5-minute vapor cycle
AIR-ONLY INDICATOR:
Blue Light: Machine has adequate power
Turn Flow Control Knob counter-clockwise to release pressure
Flow Meter indicates flow and measures leak
VERIFY REPAIRS
6. PERFORM DECAY / LEAK DOWN TEST
Pressurize the sealed system
Lock out system by turning Flow Control Knob clockwise to the fully closed position
OBSERVE PRESSURE GAUGE FOR DECAY:
Pressure Holds: No leaks, Repair is complete
Pressure Decreases:
Leak(s) exist, Repair Steps above until all repairs are complete
NOTE: Not all systems are designed to be 100% sealed
7