Table of Contents
Advertisement
2
Connection of power supply
1.First make sure the power switch of electric grand piano is at OFF position. If not, poke
the switch to OFF position.
2.Connect power cord; insert one end of power cord in AC jack of the electric grand piano
and the other end in power socket.
Warning
Make sure the power voltage is AC 220 ±10%.Too high or low voltage will damage the
electric grand piano.
Do not pull out power cord from power socket in the charged situation.
Fuse replacement shall only be made by qualified personnel.
Keyboard lid
■Open keyboard lid
Hold up the keyboard lid of the piano gently and push it inside, it will slide inside as well,
the lid will be opened.
Warning
When you open or close keyboard lid, you should hold, you can unloosen it unless it
was opened or closed completely. Take care not to let your fingers be clamped between
keyboard and lid.
■Close keyboard lid
Slide the keyboard lid of the piano towards the direction of your body and put down the lid
over keyboard.
Caution
Do not place metal objects or paper on the piano keyboard lid, otherwise the small object
on keyboard lid may fall into the electric grand piano when the lid was opened, it will be
difficult to take it out, it may cause electric shock, short circuit, fire disaster or other
serious damage to piano.
Music stand
■Raise music stand
Pull the music stand up until it was upright. Now the spring bounce outside. Put the
spring bracket on the top wooden cover of the piano, the music stand will stand on the top
wooden cover of the piano in a slant way.
Preparation before use
Advertisement
Table of Contents
