01
Panel Control and External Function
1. Panel Control
1.Power Switch
2.Master Volume
3.Start/Stop/Sync/Fill-in/
/Intro/Ending
4.Accompaniment Volume
5.Metronome, tempo
6.Chord Volume
Preparation before performance
Power connection
1.First Make sure whether the power switch is in the
OFF position. If not, switch to OFF position.
2.Connect power cord: Insert power cord in power
socket.
★Caution: When you are not using this piano, you
should remove the plug from the power socket to avoid damaging the piano parts or
from the piano being powered on for long periods of time.
Caution
•Be sure power voltage is AC 110V+10%, Too high or low of Voltage will cause
the damage to the electrical piano.
•Do not pull out power cord from power socket when the power is on.
7.Recording/Play back
8.LED Display screen
9.Style/Tone
10.Touch/Split/Dual/Sustain/Vibrato
11.Demo,Lesson 1,Lesson 2
12.Single Finger/Finger Chord/Chord Close
13.Data Wheel
2、External function
①Pedal Sustain
②110V input
③Headphone output
④Line out