Table of Contents
Advertisement
■ Sustain (right) pedal
Controllable Sustain Pedal has the same function as that of the traditional piano. Step
down the Sustain Pedal, the playing has a prolonged effect, release the pedal, the
prolonged sound will stop immediately.
Installation of piano body
1. Using 4pcs four in one screw (3) attach the support legs to the backboard.
2. Using 4pcs M6x50 (1), attach the pedal board to the left and right support legs.
3. Using 4pcs M6X20 (2), attach the piano to the base. Do not attempt this step alone,
as this is the heaviest part and can cause severe damage if dropped. Be certain
every screw is secured
4. Connect the cable from the pedal board to the "Pedal" plug in the back of the
piano.
5. Use 4pcs plug (4) to cover the screws installed in step 2.
6. Connect power and turn on your newly assembled keyboard.
■ Part
Notice: The above installation description, please refer the breakdown drawing on the
page 13.
Advertisement
Table of Contents
