SAWTOOTH ST-DCP-88 Operating Instructions Manual page 21

1. Set panel control (voice, accompaniment etc.) based on the requirement.
2. Press [MEMORY BANK] button and select required music sound bank. The music
sound bank has 4 groups together, B1, B2, B3, B4.
3. Hold [STORE] button, then press any key of M1-M3 to save current panel
parameters in the memory of M1-M3.
Instructions
If you save the panel setting in a memory including previous data, the new setting will
overwrite the previous data.
12
Tune out the stored panel setting
1.press [MEMORY BANK]button and select the set music sound bank that you want to tune
out by [DIGIT +/-]buttons.
2.Press the setting button(M1-M3)to tune out (registry memory)and panel setting will
have the corresponding change.
Instruction
When registry memory is turned out, all current panel setting will be covered. If you want
to save these setting, you need to save it in the blank registry memory position before
tuning out the saved setting.
The playback of the demo
Press the [DEMO] button, one demo can play circularly.
Press [START/STOP] button, the playback of the demo song stops.
Use of pedal
The electric grand piano has two pedals; they have the same function as traditional piano,
which can enrich music expression.
■ Pianissimo(left) pedal
When you step on pianissimo pedal, the played volume will be softer; the sound quality
makes a slight change. If you step on pianissimo pedal after played a note, the volume and
quality will not change.
Quick Guide