Page 1
Installation and operating instructions ELECTRIC FRYERS FOR PROFESSIONAL USE F18-94ETD F18-94ETDP F18-94ETDPS F2/18-98ETD F2/18-98ETDP F2/18-98ETDPS F25-94ETD F25-94ETDP F25-94ETDPS F2/25-98ETD F2/25-98ETDP F2/25-98ETDPS Model LIBR.ISTR.F90ED Code 563048000 Review 1 Edition date 08/04/2021 Language English LOTUS S.p.A. Via Calmaor, 46 31020 San Vendemiano...
Contents Contents INTRODUCTION ......................... Installation drawing ........................Components..........................Example installation of the appliance................... GENERAL INFORMATION......................Declaration of compliance......................User information, RAEE Directive on waste electrical and electronic equipment ......Technical data table ........................INSTALLATION........................... Delivery checks ..........................Removing the packaging ......................Mechanical installation .........................
INTRODUCTION Components FIG. B (ROTARY RESISTANCE) 1 O-rings 2 Rotary heating element Translation of the original instructions...
Page 5
INTRODUCTION WIRING DIAGRAM (C) A Oil basin on the floor B Oil drain cock closed C Oil drain cock open D Oil basin in the guideway E Heater lowered Translation of the original instructions...
Page 6
Touch electronic board Liquid presence sensor Remote control switch K thermocouple Single-phase safety thermostat Transformer Wiring diagram reference table MODELS TERMINAL BOARD 1 TERMINAL BOARD 2 F18-94ETD F18-94ETDP F18-94ETDPS F2/18-98ETD C + C F2/18-98ETDP C + C ...
GENERAL INFORMATION 2 GENERAL INFORMATION Declaration of compliance The manufacturer declares that the appliances comply with the requirements of the regulation GAR 2016/426 for the gas part and directive 2014/30/EU,2014/35/EU for the electrical part. Installation must be performed in compliance with current regulations, especially with regard to ventilation of the premises and the exhaust gas evacuation system.
Equipment) are those provided for by the national transpositions of European Directives 2012/19/EU Technical data table Electrical technical data table F S90ETD MAXIMUM MAXIMUM INPUT Silicon POWER MODEL DIMENSIONS POWER SUPPLY POWER (kW) SUPPLY CABLE F18-94ETD 40x90x90h 400V~3N 50/60Hz 15,95 22,95 5 x 2,5 mm² F18-94ETDP 40x90x90h 400V~3N 50/60Hz 16,2 24,13 5 x 2,5 mm²...
INSTALLATION 3 INSTALLATION Delivery checks On delivery, it is important to check the following: · External conditions of the packaging · The general status of the equipment · The conformity of the model with the information in the technical data plate and the instruction manual ·...
Page 11
INSTALLATION Warning Installation operations, any conversion to other types of gas and start-up must only be performed by qualified personnel, in accordance with current regulations. Gas systems, electrical connections and premises where the appliances are installed must comply with current regulations in the country of installation;...
INSTRUCTIONS FOR USE 4 INSTRUCTIONS FOR USE General information This appliance must only be used for its expressly intended purpose for cooking or heating food. Any other use is considered improper. The appliance is also intended for industrial use and must only be used by personnel trained for use and aware of the risks that the hot element entails.
MAINTENANCE 5 MAINTENANCE Routine When using the appliance over time, it is essential to perform regular maintenance to ensure safe operation. We therefore recommend stipulating a service contract. Caution Maintenance must only be performed by specialist personnel in compliance with current ...
MAINTENANCE Spare parts It is possible to replace parts such as the valve, the piezoelectric or the ignition control unit (depending on the type of appliance) or the gas pipes easily and quickly. To replace such parts, proceed as follows: ...
CLEANING 6 CLEANING Routine cleaning Caution The use of flammable fluids to clean the appliance is forbidden To ensure hygiene and the durability of the appliance, perform external cleaning on a regular basis, taking care not to damage the cables and the electrical connections. Before starting cleaning, disconnect the appliance from the power supply.