Figure 21: Display Settings Screen - HEIDENHAIN PWT 101 User Manual

4
Display settings screen

Figure 21: Display settings screen

The Display settings screen enables you to change the units of the values
measured by the connected encoder. The setting options vary depending on the
encoder.
Unit of measured position value
Unit of encoder: μm or ° (degrees)
Steps [LSB] in the resolution of the connected encoder
Changing the unit of the measured position values
You can choose between displaying measured position values in μm, ° (degrees),
or steps.
40
This setting changes the unit of the measured values only in specific
screens.
The product always displays the measured incremental position values
in Steps.
μm or
If you select °, the product will display the measured values in
μm or in degrees, depending on the encoder.
Tap
More
The More menu is opened
Tap Units
The Display settings screen is opened
Tap the desired unit
The desired unit takes effect
Tap Back
The changed settings take effect
The Display settings screen is closed
HEIDENHAIN | PWT 101 Block Commutation Module | User's Manual | 07/2021
Encoder diagnostics | Diagnosis