Switch-On/Switch-Off; Setting The Language; Figure 4: Warning During Start-Up Process - HEIDENHAIN PWT 101 User Manual

Basic operation | Switch-on/Switch-off
2.7

Switch-on/Switch-off

Switching on the product
The product is switched on as soon as you connect the power plug to the power
outlet. The product is switched off by disconnecting it from the power source.
The product can be switched on when an encoder is connected to it or when no
encoder is connected to it.
Verify that the encoder is connected correctly to the product before you
switch it on.
Connect the connector of the wall adapter power supply to connection X3 on
the left side panel of the product
Connect the wall adapter power supply to the power outlet
The product starts up
A warning is displayed on the product's screen

Figure 4: Warning during start-up process

Tap
OK
The Main menu is opened
Switching off the product
Disconnect the wall adapter power supply from the power outlet
Disconnect the connector of the wall adapter power supply from connection X3
on the left side panel of the product
The product is disconnected from the power source and switched off
2.8

Setting the language

The default language for the user interface is English.
HEIDENHAIN | PWT 101 Block Commutation Module | User's Manual | 07/2021
Tap Settings in the Main menu
The Language settings screen is opened
Tap the appropriate flag for the desired language
The Language changed message is displayed
Tap OK
The user interface is displayed in the selected language
2
15