Intended Use; Improper Use - HEIDENHAIN PWT 101 User Manual

Fundamentals | Intended use
1.4

Intended use

The product must only be operated when in proper and safe condition. It is
intended solely for the following use:
Diagnostics and adjustment of HEIDENHAIN encoders with absolute and
incremental interfaces
Diagnostics and adjustment of HEIDENHAIN Corporate Group encoders with
absolute or incremental interfaces
Any other use or additional use of the product is considered improper use and can
result in damage and hazards.
The product supports the use of a wide variety of peripheral devices
from different manufacturers. HEIDENHAIN cannot make any
statements on the intended use of these devices. The information on
their intended use, which is provided in the respective documentation,
must be observed. If no such information has been supplied, it must be
requested from the manufacturers concerned.
1.5

Improper use

Any use not specified in 'Intended use' is considered improper use. The company
operating the device is solely liable for any damage resulting from improper use.
In particular, the following uses are not permitted:
Use with parts, cables or connections that are defective or do not comply with
the applicable standards
Use outdoors, or in potentially explosive environments or fire risk areas
Use outside the operating conditions specified in "Specifications"
Any alterations of the device or peripherals that have not been authorized by
the manufacturers
Use as a part of a safety function
Have you found any errors or would you like to suggest changes?
We continuously strive to improve our documentation for you. Please help us by
sending your suggestions to the following e-mail address:
userdoc@heidenhain.de
HEIDENHAIN | PWT 101 Block Commutation Module | User's Manual | 07/2021
1
7