Neilsen CT4694 Quick Start Manual

Air sand blaster gun kit

AIR SAND BLASTER GUN KIT CT4694

SPECIFICATIONS

Max. pressure 8 Bar (116 PSI)

Working pressure: 6 - 8 Bar (90 -116 PSI)

Air inlet:1/4"

Air pressure: filtered and free of condensation

Dear Customer, before using this Air Sand Blaster it is necessary to study the operation manual

carefully. Thank you.

The air sandblasting gun is ideal for many applications in the car body area and all metallic surfaces.

The sandblasting gun is used for removal of rust, excessive dirt, coatings, etc., and is suitable for

using with normal corundum with a grain size of 46 to 100.

The compressed air sandblasting gun is easy to use, has a lower consumption by reusing the grain.

Scope of delivery

Air sand blasting gun

Blasting catcher

Blasting sand

Point blasting cap

Surface blasting cap

Blasting cap for outside corners

Blasting cap for inside corners

Parts of Air Sand Blasting Gun

Trigger

Aluminum grit container

Riser

Nozzle

Blasting catcher

Blasting cap

Air inlet

Table of Contents

Do you have a question about the CT4694 and is the answer not in the manual?

Page 1 AIR SAND BLASTER GUN KIT CT4694 SPECIFICATIONS Max. pressure 8 Bar (116 PSI) Working pressure: 6 - 8 Bar (90 -116 PSI) Air inlet:1/4" Air pressure: filtered and free of condensation Dear Customer, before using this Air Sand Blaster it is necessary to study the operation manual carefully.
Page 2 SAFETY NOTES 1. When working with the sand blasting gun, always wear gloves, safety glasses, hearing protection and a dust mask. 2. Always wear tight-fitting protective clothing. 3. Store pneumatic tools out of children's reach. 4. Do not use the sand blasting gun in hazardous locations. 5.
Page 3 EC DECLARATION OF CONFORMITY We CANNON TOOLS LTD 20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K. Declare that the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us.