Table of Contents
Advertisement
Half:
Half duplex IR transfer mode in Half Duplex.
Full:
Full duplex IR transfer mode in Full Duplex.
•
RxD, TxD Active: Select RxD & TxD active signal level.
•
Onboard Parallel port: This field allows the user to select the LPT port. The
default value is 378H.
378H :
Enable Onboard LPT port and address is 378H.
278H :
Enable Onboard LPT port and address is 278H.
3BCH :
Enable Onboard LPT port and address is 3BCH.
Disabled : Disable Onboard CHIP's LPT port.
NOTE: Parallel Port address is 378H/3BCH that selects the routing of IRQ7 for LPT1.
Parallel Port address is 278H that selects the routing of IRQ5 LPT1.
•
Parallel port Mode: This field allows the user to select the parallel port mode.
The default value is ECP + EPP (Normal).
Normal :
Standard mode. IBM PC/AT Compatible bidirectional parallel port.
EPP :
Enhanced Parallel Port mode.
ECP :
Extended Capabilities Port mode.
EPP+ECP : ECP Mode & EPP Mode.
•
PS/2 mouse function (Enabled): Setting the function of PS/2 mouse. When
you choice: Disabled, BIOS will release IRQ12 for other device use the default
value is Enabled.
•
USB Controller (Enabled): Setting the function of USB controller. Default
value is Enabled.
•
USB Keyboard Support (Disabled): Setting the USB keyboard support
function default value is Disabled. When you want use USB keyboard you must
Enabled it.
•
Power Button Over Ride (Enabled): Setting the Power Button function when
setting Enabled and press the power button continuos more than 4 sec, will
make the power off.
•
Ring Power Up Control (Enabled): When setting this item Enabled, and press
the power button to power off. After Ring in the System will auto power on.
•
Power Up by Alarm (Disabled): Default value is Disabled, when choice
Enabled you can setting Month Alarm, Day of Month Alarm, Week Alarm, Time
Alarm to setup the time and date to power on the computer.
•
Power Button Over Ride (Enabled): Setting the Power Button function . In
normal operation set this item Enabled, and press Power Button continuos at
least 4 sec will make computer power off. When Enabled Power Manage and
34
Advertisement
Table of Contents
