MSI Z77A-G43 GAMING User Manual

MSI Z77A-G43 GAMING User Manual

Ms-7758 (v5.x) mainboard
Hide thumbs Also See for Z77A-G43 GAMING:

Advertisement

Z77A-G43 GAMING
B75A-G43 GAMING
MS-7758 (v5.x) Manboard
G52-77581XT


Advertisement

Table of Contents
loading

Summary of Contents for MSI Z77A-G43 GAMING

  • Page 1 Z77A-G43 GAMING B75A-G43 GAMING MS-7758 (v5.x) Manboard G52-77581XT...
  • Page 2: Trademarks

    Preface Preface Copyrght Notce The materal n ths document s the ntellectual property of MICRO-STAR INTERNA- TIONAL. We take every care n the preparaton of ths document, but no guarantee s gven as to the correctness of ts contents. Our products are under contnual mprove- ment and we reserve the rght to make changes wthout notce.
  • Page 3: TechnCal Support

    If a problem arses wth your system and no soluton can be obtaned from the user’s manual, please contact your place of purchase or local dstrbutor. Alternatvely, please try the followng help resources for further gudance. Vst the MSI webste for techncal gude, BIOS updates, drver updates, and other nformaton: http://www.ms.com/servce/download/ Contact our techncal staff at: http://support.ms.com...
  • Page 4: Fcc-B RadO Frequency Interference Statement

    Preface Preface FCC-B Rado Frequency Interference Statement Ths equpment has been tested and found to comply wth the lmts for a Class B dgtal devce, pursuant to Part 15 of the FCC Rules. These lmts are desgned to provde reasonable protecton aganst harmful nterference n a resdental nstallaton. Ths equpment generates, uses and can radate rado frequency energy and, f not nstalled and used n accordance wth the nstructons, may cause harmful nterference to rado communcatons.
  • Page 5: RadAtOn Exposure Statement

    MS-7758 MS-7758 Radaton Exposure Statement Ths equpment comples wth FCC radaton exposure lmts set forth for an uncon- trolled envronment. Ths equpment and ts antenna should be nstalled and operated wth mnmum dstance 20 cm between the radator and your body. Ths equpment and ts antenna must not be co-located or operatng n conjuncton wth any other antenna or transmtter.
  • Page 6: Battery InformatOn

    Replace only wth the same or equvalent type recommended by the manufacturer. Chemcal Substances Informaton In complance wth chemcal substances regulatons, such as the EU REACH Regulaton (Regulaton EC No. 1907/2006 of the European Parlament and the Councl), MSI provdes the nformaton of chemcal substances n products at: http://www.ms.com/html/popup/csr/evmtprtt_pcm.html...
  • Page 7: Weee (Waste ElectrCal And ElectronC EquPment) Statement

    MSI wll comply wth the product take back requrements at the end of lfe of MSI-branded products that are sold nto the EU.
  • Page 8 MSI će poštovat zahtev o preuzmanju ovakvh prozvoda kojma je stekao vek trajanja, koj maju MSI oznaku  koj su prodat u EU. Ove proz- vode možete vratt na lokalnm mestma za prkupljanje.
  • Page 9  produttor d dett materal saranno obblgat a rtrare ogn prodotto alla fine del suo cclo d vta. MSI s adeguerà a tale Drettva rtrando tutt  prodott marchat MSI che sono stat vendut all’nterno dell’Unone Europea alla fine del loro...
  • Page 10: Table Of Contents

    Preface Preface CONTENTS ▍ Copyrght Notce ....................  Trademarks .................... Revson Hstory.....................  Techncal Support.................. Safety Instructons .................. FCC-B Rado Frequency Interference Statement.......... v CE Conformty ....................v Radaton Exposure Statement ............... v European Communty Complance Statement ..........v Tawan Wreless Statements ................
  • Page 11 MS-7758 MS-7758 Chapter 2 BIOS Setup .................2-1 Enterng ........................ 2-2 Overvew ......................2-2 Boot devce prorty bar ..................2-3 Operaton ......................2-4 SETTINGS ......................2-5 OC ........................2-13 ECO ........................2-18 BROWSER ......................2-19 Installng Wnk ....................2-19 UTILITIES ......................2-20 Updatng the BIOS wth Lve Update ..............
  • Page 13: Chapter 1 GettNg Started

    Chapter 1 Gettng Started Thank you for choosng the Z77A-G43 GAMING/ B75A-G43 GAMING Seres (MS-7758 v5.X) ATX motherboard. The Seres manboards are based on Intel Z77/ B75 chpset for optmal system efficency. ® Desgned to fit the advanced Intel LGA1155 ®...
  • Page 14: PackNg Contents

    * These pctures are for reference only and may vary wthout notce. * The packng contents may vary accordng to the model you purchased. * If you need to purchase the optonal accessores or request part numbers, please vst the MSI webste at http://www.ms.com/ndex.php or consult the dealer.
  • Page 15: Assembly PrecautOns

    MS-7758 Assembly Precautons ■ The components ncluded n ths package are prone to damage from electrostatc dscharge (ESD). Please adhere to the followng nstructons to ensure successful computer assembly. ■ Always turn off the power supply and unplug the power cord from the power outlet before nstallng or removng any computer component.
  • Page 16: MaNboard SpecFicatOns

    Generaton Intel Core™ 7/ Core™ 5/ Core™ 3/ Pentum / Celeron ® ® ® Processors for LGA 1155 socket Chpset ■ Intel Z77 chpset (Z77A-G43 GAMING) ® ■ Intel B75 chpset (B75A-G43 GAMING) ® Supports Intel SBA by Intel ® ®...
  • Page 17 MS-7758 Connectors ■ Back panel 1x PS/2 keyboard/ mouse combo port 6x USB 2.0 ports (Z77A-G43 GAMING) or 4x USB 2.0 ports (B75A-G43 GAMING) 2x USB 3.0 ports 1x LAN port 1x HDMI port**, supportng a maxmum resoluton of 1920x1200...
  • Page 18: Connectors QuCk GuDe

    Gettng Started Connectors Quck Gude DIMM3 JPWR2 DIMM2 DIMM4 DIMM1 SYSFAN3 CPUFAN SYSFAN1 Back Panel JTURBO1 JPWR1 SYSFAN2 JUSB3 PCI_E1 SYSFAN4 PCI_E2 JBAT1 BATT PCI_E3 JCI1 SATA2 PCI1 SATA1 PCI_E4 SATA4 SATA3 PCI2 SATA6 SATA5 PCI3 JAUD1 JFP2 JFP1 JTPM1 JUSB1/ 2 JLPT1 JDLED3...
  • Page 19 MS-7758 Connectors Reference Gude Port Name Port Type Page Back Panel I/O Ports LGA 1155 CPU Socket 1-10 CPUFAN,SYSFAN1~4 Fan Power Connectors 1-23 DIMM1~4 DDR3 Memory Slots 1-16 JAUD1 Front Panel Audo Connector 1-27 JBAT1 Clear CMOS Jumper 1-30 JCI1 Chasss Intruson Connector 1-26 JCOM1...
  • Page 20: Back Panel QuCk GuDe

    Gettng Started Back Panel Quck Gude (For Z77A-G43 GAMING) USB 2.0 Port Mouse/ Keyboard VGA Port RS-Out Lne-In USB 2.0 Port CS-Out Lne-Out SS-Out USB 2.0 Port HDMI Port USB 3.0 Port DVI-D Port ▶ Mouse/Keyboard A combnaton PS/2 mouse/keyboard DIN connector for a PS/2 mouse/keyboard.
  • Page 21 MS-7758 ▶ HDMI Port The Hgh-Definton Multmeda Interface (HDMI) s an all-dgtal audo-vdeo nterface that s capable of transmttng uncompressed streams. HDMI supports all types of TV formats, ncludng standard, enhanced, or hgh-definton vdeo, plus mult-channel dgtal audo on a sngle cable. ▶...
  • Page 22: Cpu (Central ProcessNg UnT)

    Ths manboard s desgned to support overclockng. Before attemptng to overclock, please make sure that all other system components can tolerate overclockng. Any attempt to operate beyond product specficatons s not recommend. MSI does not guarantee the damages or rsks caused by nadequate operaton beyond product specficatons.
  • Page 23 MS-7758 CPU & Cooler Installaton When nstallng a CPU, always remember to nstall a CPU cooler. A CPU cooler s necessary to prevent overheatng and mantan system stablty. Follow the steps below to ensure correct CPU and CPU cooler nstallaton. Wrong nstallaton can damage both the CPU and the manboard.
  • Page 24 Gettng Started Inspect the CPU to check f t s Evenly spread a thn layer of properly seated n the socket. Press thermal paste (or thermal tape) on the loadng lever down and lock t the top of the CPU. Ths wll help n under the retenton tab.
  • Page 25 MS-7758 Push down on the heatsnk untl the Inspect the manboard to ensure that four clps get wedged nto the holes the clp-ends have been properly on the manboard. Press the four locked n place. hooks down to fasten the cooler. As each hook locks nto poston a clck should be heard.
  • Page 26: MountNg Screw Holes

    Gettng Started Mountng Screw Holes When nstallng the manboard, first nstall the necessary mountng stands requred for a manboard on the mountng plate n your computer case. If there s an I/O back plate that came wth the computer case, please replace t wth the I/O backplate that came wth the manboard package.
  • Page 27: Power Supply

    MS-7758 Power Supply JPWR1: ATX 24-pn Power Connector Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX 24-pn power supply, algn the power supply cable wth the connector and firmly press the cable nto the connector. If done correctly, the clp on the power cable should be hooked on the manboard’s power connector.
  • Page 28: Memory

    Gettng Started Memory These DIMM slots are used for nstallng memory modules. For more nformaton on compatble components, please vst http://www.ms.com/servce/test-report DDR3 240-pn, 1.5V 48x2=96 pn 72x2=144 pn Dual-Channel mode Populaton Rule In Dual-Channel mode, the memory modules can transmt and receve data wth two data bus channels smultaneously.
  • Page 29 MS-7758 Installng Memory Modules Unlock the DIMM slot by pushng the mountng clps to the sde. Vertcally nsert the memory module nto the DIMM slot. The memory module has an off-center notch on the bottom that wll only allow t to fit one way nto the DIMM slot. Push the memory module deep nto the DIMM slot.
  • Page 30: ExpansOn Slots

    Gettng Started Expanson Slots Ths manboard contans numerous ports for expanson cards, such as dscrete graphcs or audo cards. PCIe Expanson Slot The PCIe slot supports the PCIe nterface expanson card. PCIe 3.0 x16 Slot PCIe 2.0 x16 Slot PCIe 2.0 x1 Slot PCI Expanson Slot The PCI slot supports addtonal LAN, SCSI, USB, and other add-on cards that comply wth PCI specficatons.
  • Page 31: Deo/ GraphCs Cards

    nstalled by way of the manboard’s expanson slots. Addng on one or more dscrete vdeo cards wll sgnficantly boost the system’s graphcs performance. For best compatblty, MSI graphcs cards are recommended. Sngle Vdeo Card Installaton Determne what type of expanson slot(s) the vdeo card wll use.
  • Page 32 Important • Please ensure that all graphcs cards used n CrossFre™ mode are of the same brand and specficatons. For best compatblty wth the manboard, MSI graphcs cards are recommended. • Make sure to connect an adequate power supply to the power connectors on the graphcs cards to ensure stable operaton.
  • Page 33 MS-7758 Boot up the computer and nstall the drvers and software ncluded n your vdeo card package. For more nformaton, please refer to the manual that came wth your vdeo card. After all of the hardware and software has been properly nstalled, reboot the sys- tem.
  • Page 34: Internal Connectors

    SATA4 SATA6 SATA1 SATA3 SATA5 SATA1~2 (6Gb/s), SATA3~6 (3Gb/s) (Z77A-G43 GAMING) SATA1 (6Gb/s), SATA2~6 (3Gb/s) (B75A-G43 GAMING) Important • Many SATA devces also need a power cable from the power supply. Such devces nclude dsk drves (HDD), sold state drves (SSD), and optcal drves (CD / DVD / Blu-Ray).
  • Page 35 MS-7758 CPUFAN,SYSFAN1~4: Fan Power Connectors The fan power connectors support system coolng fans wth +12V. If the motherboard has a System Hardware Montor chpset on-board, you must use a specally desgned fan wth a speed sensor to take advantage of the CPU fan control. Remember to connect all system fans.
  • Page 36 Gettng Started JFP1, JFP2: Front Panel Connectors These connectors connect to the front panel swtches and LEDs. The JFP1 connector s complant wth the Intel Front Panel I/O Connectvty Desgn Gude. When nstallng ® the front panel connectors, please use the optonal mConnectors to smplfy nstallaton. Plug all the wres from the computer case nto the mConnectors and then plug the mConnectors nto the motherboard.
  • Page 37 MS-7758 JUSB3: USB 3.0 Expanson Connector The USB 3.0 port s backwards compatble wth USB 2.0 devces. It supports data transfer rates up to 5Gbts/s (SuperSpeed). BATT * The MB layout n ths figure s for reference only. USB 3.0 Bracket (optonal) Important •...
  • Page 38 Gettng Started JUSB1~2: USB 2.0 Expanson Connector Ths connector s desgned for connectng hgh-speed USB perpherals such as USB HDDs, dgtal cameras, MP3 players, prnters, modems, and many others. BATT * The MB layout n ths figure s for reference only. USB 2.0 Bracket (optonal) Important Note that the VCC and GND pns must be connected correctly to avod possble dam-...
  • Page 39 MS-7758 JAUD1: Front Panel Audo Connector Ths connector allows you to connect the front audo panel located on your computer case. Ths connector s complant wth the Intel Front Panel I/O Connectvty Desgn ® Gude. BATT JTPM1: TPM Module Connector Ths connector connects to a TPM (Trusted Platform Module).
  • Page 40 Gettng Started JCOM1: Seral Port Connector Ths connector s a 16550A hgh speed communcaton port that sends/receves 16 bytes FIFOs. You can attach a seral devce. BATT JLPT1: Parallel Port Connector Ths connector s used to connect an optonal parallel port bracket. The parallel port s a standard prnter port that supports Enhanced Parallel Port (EPP) and Extended Capabltes Parallel Port (ECP) mode.
  • Page 41 MS-7758 JDLED3: Voce Gene Connector (optonal) Ths connector s used to lnk to the voce control module (optonal). Please refer to ts user gude for more detals and usages. BATT JTURBO1: MultConnect Panel Connector (optonal) Ths connector s used to connect an optonal front panel for controlng the OC Gene and some addtonal functons.
  • Page 42: Jumper

    Gettng Started Jumper JBAT1: Clear CMOS Jumper There s CMOS RAM onboard that s external powered from a battery located on the motherboard to save system configuraton data. Wth the CMOS RAM, the system can automatcally boot nto the operatng system (OS) every tme t s turned on. If you want to clear the system configuraton, set the jumpers to clear the CMOS RAM.
  • Page 43: DrVers And UtLTEs

    After you nstall the operatng system you wll need to nstall drvers to maxmze the performance of the new computer you just bult. MSI manbaord comes wth a Drver Dsc. Drvers allow the computer to utlze your manboard more efficently and take advantage of any specal features we provde.
  • Page 45: Chapter 2 Bios Setup

    Chapter 2 BIOS Setup CLICK BIOS II s a revolutonary UEFI nterface that allows you to setup and configure your system for optmum use. Usng your mouse and keyboard, users can change BIOS settngs, montor CPU temperature, select the boot devce prorty and vew system nformaton such as the CPU name, DRAM capacty, the OS verson and the BIOS verson.
  • Page 46: EnterNg

    BIOS Setup Enterng Power on the computer and the system wll start the Power On Self Test (POST) pro- cess. When the message below appears on the screen, please <DEL> key to enter CLICK BIOS II: Press DEL key to enter Setup Menu, F11 to enter Boot Menu If the message dsappears before you respond and you stll need to enter CLICK BIOS II, restart the system by turnng the computer OFF then back ON or pressng the RESET button.
  • Page 47: Boot DevCe PrOrTy Bar

    ■ ECO - Ths menu s related to energy-savng settngs. ■ BROWSER - Ths feature s used to enter the MSI Wnk web browser. ■ UTILITIES - Ths menu contans utltes for backup and update. ■ SECURITY - The securty menu s used to keep unauthorzed people from mak- ng any changes to the settngs.
  • Page 48: OperatOn

    BIOS Setup Operaton CLICK BIOS II allows you to control BIOS settngs wth the mouse and the keyboard. The followng table lsts and descrbes the hot keys and the mouse operatons. Hot key Mouse Descrpton <↑↓→← > Select Item Move the cursor <Enter>...
  • Page 49: Settings

    MS-7758 SETTINGS System Status ▶ System Date Ths allows you to set the system date that you want (usually the current date). The format s <day> <month> <date> <year>. Day of the week, from Sun to Sat, determned by BIOS. Read-only.
  • Page 50 BIOS Setup Advanced ▶ PCI Subsystem Settngs Press <Enter> to enter the sub-menu. ▶ PCIE GEN3 Ths tem s used to enable/ dsable the PCIe generaton 3 support. ▶ PCI Latency Tmer Controls how long each PCI devce can hold the bus before another takes over. When set to hgher values, every PCI devce can conduct transactons for a longer tme and thus mprove the effectve PCI bandwdth.
  • Page 51 [Dsabled] Dsable the Ipv6 PXE boot support. ▶ SATA Mode (Only Z77A-G43 GAMING supports RAID mode) Ths tem s used to specfy RAID/ IDE/ AHCI mode for SATA port. Important You cannot swtch between AHCI and IDE f you already have your operatng system nstalled.
  • Page 52 BIOS Setup ▶ Intel(R) Rapd Start Technology Press <Enter> to enter the sub-menu. ▶ Intel(R) Rapd Start Technology Ths tem s used to enable/ dsable the Intel Rapd Start technology. ▶ USB Configuraton Press <Enter> to enter the sub-menu. ▶ USB Controller Ths tem allows you to enable/ dsable the ntegrated USB 2.0 controller.
  • Page 53 Allow you to enter BIOS setup wth hot key functon. Important If you want to enter BIOS n MSI Fast Boot mode, you have to clck the "GO2BIOS" tab on Fast Boot utlty screen or press the "GO2BIOS" button (optonal) on the motherboard.
  • Page 54 Fast Boot s one of nnovaton n Wndows 8. When enabled, t allows user to dsable the ntalzatons of USB, PS2 and SATA devces for acceleratng the system bootng tme. Ths tem wll only be avalable when "MSI Fast Boot" s dsabled. [Enabled] Enable the Fast Boot configuraton.
  • Page 55 MS-7758 ▶ Resume By RTC Alarm The field s used to enable or dsable the feature of bootng up the system on a scheduled tme/date. ▶ Date/ HH:MM:SS If Resume By RTC Alarm s set to [Enabled], the system wll automatcally resume (boot up) on a specfic date/hour/mnute/second specfied n these fields (usng the <+>...
  • Page 56 BIOS Setup Save & Ext ▶ Dscard Changes and Ext Ths t s used to abandon all changes and ext setup. ▶ Save Changes and Reboot Ths tem s used to save changes and reboot the system. ▶ Save Changes Ths tem s used to save changes.
  • Page 57 It shows the adjusted CPU frequency. Read-only. ▶ Adjust CPU Rato n OS Enable ths tem to allow CPU rato changes n the OS by usng MSI Control Center II. ▶ Internal PLL Overvoltage Ths tem s used to adjust the PLL voltage.
  • Page 58 BIOS Setup ▶ EIST Enhanced Intel SpeedStep technology allows you to set the performance level of the mcroprocessor whether the computer s runnng on battery or AC power. Ths field only appears wth nstalled CPUs that support ths technology. ▶ Intel Turbo Boost Enables or dsables Intel Turbo Boost whch automatcally boosts CPU performance above rated specficatons (when applcatons requests the hghest performance state...
  • Page 59 MS-7758 ▶ GT Rato Ths settng controls the rato of ntegrated graphcs frequency to enable the ntegrated graphcs to run at dfferent frequency combnatons. ▶ Adjusted GT Frequency It shows the adjusted ntegrated graphcs frequency. Read-only. ▶ Spread Spectrum Ths functon reduces the EMI (Electromagnetc Interference) generated by modulatng clock generator pulses.
  • Page 60 BIOS Setup ▶ CPU Specficatons Press <Enter> to enter the sub-menu. Ths sub-menu hghlghts all the key features of your CPU. The nformaton wll vary by model and s read-only. You can also access ths nformaton at any tme by pressng [F4]. Press <Enter> to enter the sub-menu. ▶...
  • Page 61 MS-7758 and nstructons from memory nto L2 cache for reducng the latency tme assocated wth memory reads. [Dsabled] Dsable the CPU hardware prefetcher. ▶ Adjacent Cache Lne Prefetch [Enabled] Enable or dsable the CPU hardware prefetcher to pre-fetch the adjacent cache lne.
  • Page 62: Eco

    BIOS Setup Important Once you clck the “ECO” button n the pre-set area, some tems n ECO menu wll be fixed and un-adjustable. ▶ EuP 2013 Energy Usng Products Lot 6 2013 (EUP) reduces power consumpton when system s off or n standby mode. Note: When enabled, the system wll not support RTC wake up event functons.
  • Page 63: Browser

    MS-7758 BROWSER Please nstall the MSI "Wnk" applcaton first n the Wndows operatng system wth the MSI Drver Dsc before usng the browser. Then you can clck the BROWSER to access the Internet, e-mal and nstant messagng. Installng Wnk To nstall Wnk, follow the steps below: Power on your computer and enter Wndows operatng system.
  • Page 64: Utilities

    Ths tool can detect and update your BIOS onlne so that you won’t need to spend tme searchng manually. Important HDD Backup and Lve Update request Wnk, please nstall the "Wnk" software appl- caton from MSI Drver Dsc n Wndows first. And then you can access these two utltes by clckng ther respectve buttons. 2-20...
  • Page 65 MS-7758 ▶ M-Flash ▶ BIOS Boot Functon Ths allows you to enable/ dsable the system to boot from the BIOS file nsde USB drve (FAT 32 format only). ▶ Select one file to boot When the BIOS Boot functon as sets to [Enabled], ths tem s selectable. Ths tem allows to select partcular BIOS file from the USB/ Storage (FAT 32 format only) drve.
  • Page 66: UpdatNg The Bios WTh LVe Update

    BIOS Setup Updatng the BIOS wth Lve Update Ths secton tells you how to update the BIOS by usng the Lve Update utlty before enterng Operatng System. Lve Update wll update the BIOS automatcally when connectng to the Internet. To update the BIOS wth the Lve Update utlty: Clck Lve Update button on the BIOS UTILITIES menu.
  • Page 67: Security

    MS-7758 SECURITY ▶ Admnstrator Password Set the admnstratve password that wll be requred to enter the BIOS. ▶ User Password Set the user password that wll be requred to enter the operatng system. Important When selectng the Admnstratve / User Password tems, a password box wll appear on the screen.
  • Page 68 BIOS Setup ▶ Chasss Intruson Configuraton Press <Enter> to enter the sub-menu. ▶ Chasss Intruson Enables or dsables the feature of recordng the chasss ntruson status and ssung a warnng message f opened. To clear the warnng logs, set the field to [Reset]. The settng of the field wll return to [Enabled] later.
  • Page 69: AppendX A Realtek AudO

    Appendx A Realtek Audo The Realtek audo provdes 10-channel DAC that smul- taneously supports 7.1 sound playback and 2 channels of ndependent stereo sound output (multple streamng) through the Front-Out-Left and Front-Out-Rght chan- nels.
  • Page 70: Software ConfiguratOn

    Realtek Audo Software Configuraton After nstallng the audo drver (see Chapter 1 - Drver and Utltes), the “Realtek HD Audo Manager” con wll appear at the notficaton area (lower rght of the screen). You may double clck the con and the GUI wll pop up accordngly. double clck the con It s also avalable to enable the audo drver by clckng the Realtek HD Audo Manager from the Control Panel.
  • Page 71 MS-7758 ■ Devce Selecton Here you can select a audo output source to change the related optons. The “check” sgn (n orange) ndcates the devces as default. ■ Volume Adjustment You can control the volume or balance the rght/left sde of the speakers that you plugged n front or rear panel by adjust the bar.
  • Page 72: Hardware Default SettNg

    Realtek Audo Hardware Default Settng The followng dagrams are audo back panel default settng. ■ Backpanel audo jacks to 2-channel speakers dagram F r o ■ Backpanel audo jacks to 4-channel speakers dagram F r o R e a...
  • Page 73 MS-7758 ■ Backpanel audo jacks to 6-channel speakers dagram F r o C e n R e a t e r & S u b w o o f ■ Backpanel audo jacks to 8-channel speakers dagram F r o C e n R e a t e r...
  • Page 75: AppendX B Intel Raid

    Appendx B Intel RAID Ths appendx wll assst users n configurng and en- ablng RAID functonalty and acceleratng system on platforms...
  • Page 76: IntroductOn

    Intel RAID Introducton The manboard comes wth the Intel RAID controller that allows you to configure SATA hard drves as RAID sets. SATA hard drves delver blsterng transfer speeds up to 6 Gb/s. Seral ATA uses long, thn cables, makng t easer to connect your drve and mprovng the arflow nsde your PC.
  • Page 77: UsNg Intel RapD Storage Technology OptOn Rom

    MS-7758 Usng Intel Rapd Storage Technology Opton ROM The Intel Rapd Storage Technology Opton ROM should be ntegrated wth the sys- tem BIOS on all manboards wth a supported Intel chpset. The Intel Rapd Storage Technology Opton ROM s the Intel RAID mplementaton and provdes BIOS and DOS dsk servces.
  • Page 78: Create Raid Volume

    Intel RAID After pressng the <Ctrl> and <I> keys smultaneously, the followng wndow wll ap- pear: MAIN MENU MAIN MENU Recovery Volume Optons Create RAID Volume Acceleraton Optons Delete RAID Volume Ext Reset Dsks to Non-RAID DISK / VOLUME INFORMATION RAID Volumes : None defined.
  • Page 79 MS-7758 In the Dsk field, press <Enter> key and use <Space> key to select the dsks you want to create for the RAID volume, then clck <Enter> key to finsh selecton. Ths field wll become avalable accordng to the selected RAID level. Then select the strp sze for the RAID array by usng the “upper arrow”...
  • Page 80: Intel Raid

    Intel RAID Go to the Create Volume field and press <Enter>, the followng screen appears for you to confirm f you are sure to create the RAID volume. Press <Y> to contnue. CREATE VOLUME MENU Name : Volume0 RAID Level : RAID1(Mrror) Dsks : Select Dsks...
  • Page 81 MS-7758 ■ Delete RAID Volume Here you can delete the RAID volume, but please be noted that all data on RAID drves wll be lost. Important If your system currently boots to RAID and you delete the RAID volume n the Intel RAID Opton ROM, your system wll become un-bootable.
  • Page 82 Intel RAID ■ Reset Dsks to Non-RAID Select opton 3 Reset Dsks to Non-RAID and press <Enter> to delete the RAID volume and remove any RAID structures from the drves. The followng screen appears: MAIN MENU Recovery Volume Optons Create RAID Volume Recovery Volume Optons Delete RAID Volume RESET RAID DATA...
  • Page 83 MS-7758 ■ Recovery Volume Optons Select opton 4 Recovery Volume Optons and press <Enter> to change recovery volume mode. The followng screen appears: RECOVERY VOLUME OPTIONS Enable Only Recovery Dsk Enable Only Master Dsk HELP Enable Only Recovery Dsk - enables recovery dsk f avalable and dsables master dsk.
  • Page 84: InstallNg DrVer

    For Wndows 7 you can use CD/ DVD/ USB drve. Important Please follow the nstructon below to make an “Intel RAID Drver” for yourself. ® Insert the MSI DVD nto the DVD-ROM drve. • • Clck the “Browse CD” on the Setup screen. •...
  • Page 85 MS-7758 ■ Exstng Wndows Drver Installaton Insert the MSI DVD nto the DVD-ROM drve. The DVD wll auto-run and the setup screen wll appear. Under the Drver tab, clck on Intel RAID Drvers. The drvers wll be automatcally nstalled. ■...
  • Page 86: Degraded Raid Array

    Intel RAID Degraded RAID Array A RAID 1, RAID 5 or RAID 10 volume s reported as degraded when one of ts hard drve members fals or s temporarly dsconnected, and data mrrorng s lost. As a result, the system can only utlze the remanng functonal hard drve member. To re-establsh data mrrorng and restore data redundancy, refer to the procedure below that corre- sponds to the current stuaton.
  • Page 87 MS-7758 Ext Intel RAID Opton ROM, and then reboot to Wndows system. When prompted to rebuld the RAID volume, clck ‘Yes’. The Intel Rapd Storage Technology applcaton wll be launched. Rght-clck the new hard drve and select ‘Rebuld to ths Dsk’. The ‘Rebuld Wzard’ wll be launched whch wll gude you through the process of rebuldng to the new hard drve.
  • Page 88: System AcceleratOn (OptOnal

    Install Wndows operatng system. Powered off. Connect the SSD. Reboot the system to Wndows. Insert the MSI DVD nto the DVD-ROM drve. Clck here Clck the “STORAGE” on the Setup screen. Clck the "Intel RAID Drver" to nstall Intel Rapd Storage Technology applcaton.
  • Page 89 MS-7758 Run Intel Rapd Storage Technology applcaton. ® Clck "Enable acceleraton" under Accelerate. Clck here Select the acceleraton optons. Clck OK and reboot the system. The page refreshes and reports the new acceleraton configuraton n the Acceleraton Vew. Important You can clck “More help on ths page” or "More help" of the Intel Rapd Storage ®...
  • Page 90: Rst SynchronZatOn (OptOnal

    Intel RAID RST Synchronzaton (optonal) If you are usng Maxmzed mode as the Acceleraton mode, the data on the hard dsk s not always synchronzed wth the data n the SSD cache. In some stuatons, you may want to manually sync the dsks for avodng data loss. Follow these steps to sync manually.
  • Page 91: AppendX C Install WNdows Xp Notes

    Appendx C Install Wndows XP Notes Ths chapter descrbes how to nstall Wndows XP wth IDE or AHCI mode.
  • Page 92: InstallNg WNdows Xp WTh Ide Mode

    Install Wndows XP Notes Installng Wndows XP wth IDE Mode You wll fal and encounter a blue screen whle nstallng Wndows XP, because t s not natvely supported to be nstalled n the storage devce wth AHCI mode. If you stll prefer to nstall Wndows XP as the operatng system, please change the BIOS tem as below.
  • Page 93: InstallNg WNdows Xp WTh Ahci Mode

    AHCI drvers for Wndows XP n advanced. Creatng a Intel AHCI Drver Dsc Please follow the nstructon below to make an “AHCI Drver” for yourself. ■ Insert the MSI DVD nto the DVD-ROM drve. ■ Clck the “Browse CD” on the Setup screen. ■...
  • Page 95: AppendX D Intel Sba

    Appendx D Intel SBA Intel Small Busness Advantage (Intel SBA) provdes ® ® an out-of-the-box hardware-based securty and produc- tvty sute desgned for the small busness user. Intel SBA ncludes a customzable user nterface and several bundled Intel applcatons.
  • Page 96: PrerequSTes

    Intel SBA Prerequstes ■ Supported Operatng Systems Intel SBA supports followng OS: ■ Wndows 7 Professonal 64-bt and 32-bt ■ Wndows 7 Enterprse 64-bt ■ Requred User Permssons You must run the nstaller and the customzaton wzard wth a user that has local ad- mnstrator permssons on the computer.
  • Page 97: InstallNg Intel Sba

    MS-7758 Installng Intel SBA Ths procedure descrbes how to nstall Intel SBA. ■ To nstall Intel SBA: Logon to the computer wth a user that has admnstrator prvleges. Insert the applcaton DVD nto the DVD-ROM drve. The setup screen wll automat- cally appear.
  • Page 98: Help Button

    Intel SBA Password settngs By default, the system s n an unconfigured state. Before the hardware capabltes can be used by Intel SBA software, the system must be configured. Ths s done n the Set- tngs > Password Settngs tab n the man menu of the GUI. Fll out the form to create the new password and clck “Save”.

This manual is also suitable for:

B75a-g43 gaming

Table of Contents