Table of Contents
Advertisement
250 : 250 msec
500 : 500 msec
750 : 750 msec
1000 : 1000 msec
•
Security Option: This category allows you to limit access to the system and
Setup, or just to Setup. The default value is Setup.
System : The system will not boot and access to Setup utility if the correct
password is not entered at the prompt.
Setup :
The system will boot, but access to Setup utility if the incorrect
password is entered at the prompt.
NOTE: To disable security, select PASSWORD SETTING at Main Menu and then you
will be asked to enter password. Do not type anything and just press <Enter>, it
will disable security. Once the security is disabled, the system will boot and you
can enter Setup freely.
•
PCI/VGA Palette Snoop: Some display cards that are non-standard VGA such
as graphics accelerators or MPEG Video Cards may not show colors properly.
The setting Enabled should correct this problem. Otherwise leave this on the
setup default setting of Disabled.
•
OS Select For DRAM > 64MB: When using OS2 operating systems with
installed DRAM of greater than 64MB, you need to OS2 this option otherwise
leave this on the setup default of Non-OS2.
•
Video BIOS Shadow: It determines whether video BIOS will be copied to RAM,
however, it is optional from chipset design. Video Shadow will increase the
video speed.
Enabled :
Video shadow is enabled
Disabled :
Video shadow is disabled
•
C8000 - CBFFF Shadow:
CC000 - CFFFF Shadow:
D0000 - D3FFF Shadow:
D4000 - D7FFF Shadow:
D8000 - DBFFF Shadow:
DC000 - DFFFF Shadow:
These categories determine whether optional ROM will be copied to RAM by
16K byte or 32K byte per/unit and the size depends on chipset.
Enabled :
Optional shadow is enabled.
Disabled : Optional shadow is disabled.
24
Advertisement
Table of Contents
