Suspend Time Out - MSI NLX LX3 Manual

Suspend Time Out

This option specifies the length of a period of system inactivity
while in Standby state. When this length of time expires, the computer
enters Suspend power state. The settings are Disabled, 1 min, 2 min, 3 min, 4
min, 5 min, 6 min, 7 min, 8 min, 9 min, 10 min, 11 min, 12 min, 13 min, 14 min or
15 min. The Optimal and Fail-Safe default settings are Disabled.
Throttle Slow Clock Ratio
This option specifies the speed at which the system clock runs in
power saving states. The settings are expressed as a ratio between the
normal CPU clock speed and the CPU clock speed when the computer is in
the power-conserving state.
Modem Use IO Port
This indicates which IO port will be used by the Modem(if there is a
Modem).
Modem Use IRQ
This indicates which IRQ no. will be used by the Modem(if there is
a Modem).
Display Activity/Device 6/Device 7/Device 8/Device 5/Device
0/Device 1/Device 1/Device 2/Device 3/System Thermal
When set to Monitor, these options enable event monitoring on the
specified hardware interrupt request line. If set to Monitor and the computer
is in a power saving state, AMI
IRQ line. The computer enters the full on power state if any activity occurs.
®
AMI BIOS reloads the Standby and Suspend timeout timers if
activity occurs on the specified IRQ line.
Thermal Slow Clock Ratio
When set to Monitor, then you can choose the throttle ratio. This
option is connected with the CPU Critical Temperature Option.
®
BIOS watches for activity on the specified
3-16
®