MSI NLX LX3 Manual page 73

Parallel Port IRQ
If the onboard parallel mode is not on auto mode, the user can
select the interrupt line for onboard parallel port. We suggest that the user
select the interrupt for the onboard parallel port as shown below:
Onboard parallel port set at
LPT1(378H)
LPT2(278H)
LPT3(3BCH)
Parallel Port DMA Channel
This option allows user to choose DMA channel 1 to 3 for the
onboard parallel port on ECP mode.
K/B Wake-Up Function
During Any Key, if there is any activity on the keyboard, the
system will change from OFF to ON. During Specific Key, you need to set
the "Change Keyboard Wake-up Password" on the BIOS setup. Then, if
you type the password, the system will change its status from OFF to ON.
During Disabled, this function will not work.
Mouse Wake-Up Function
During Enabled, if there is any activity on the mouse, the system
will change from suspend to ON. During Disabled, this function will not
work. ( This is reserved for future "New Super I/O -W83977TF)
Onboard IDE
Set this option to enable or disable on board IDE controller.
Onboard Sound Chip
Set this option to enable or disable on board sound chip.
Onboard LAN Chip
Set this option to enable or disable on board LAN chip.
®
Parallel Port IRQ
7
5
5
3-26