Table of Contents
Advertisement
OPERATING PRINCIPALS
The Axle uses digital electronic gyroscopes and acceleration sensors
to control balance and motion, depending on the user's center of
gravity. The Axle also uses a control system to drive the motors that
are located within the wheels. The Axle has a built-in inertia dynamic
stabilization system that can help assist with balance when moving
forward and backwards, but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
Model:
Net Weight:
Load:
Max Speed:
Max Distance Range:
Max Incline Angle:
Minimum Turning Radius:
Charge Time:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Ground Clearance:
Platform Height:
Tire Type:
WARNING
Any Axle that does not work properly can
cause you to lose control and fall. Inspect
the entire Axle thoroughly before every ride,
and do not ride it until any problems
have been corrected.
SPECIFICATIONS
Hover-1
Axle (H1-AXL)
™
14.3 lbs (6.5 kg)
44-160 lbs (20-72.5 kg)
Up to 7 mph (11.3 km/h)
Up to 3 miles (4.8 km)
10°
0°
Up to 6 hours
Lithium-ion
37 V
2.0Ah
AC 100-240V, 50/60Hz
1 Inch (2.54 cm)
4.5 Inches (11.43 cm)
Non-Pneumatic Solid Tires
5
Advertisement
Table of Contents
