Table of Contents
Advertisement
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS
CAN AND MAY LEAD TO DAMAGE TO YOUR AXLE, VOID YOUR
MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE
SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.
Before using your Axle, be sure to familiarize yourself with the
operating procedures.
OPERATING YOUR AXLE
Make sure the Axle is fully charged before initial use. For charging
instructions, please follow details under CHARGING YOUR AXLE.
Stand directly behind your Axle and place one foot on the
corresponding foot mat (as described in the diagram below). Keep
your weight on the foot which is still on the ground, otherwise the
Axle may begin to move or vibrate, making it difficult to step on
evenly with your other foot. When you are ready, shift your weight to
the foot already placed on the Axle and step on with your second
foot quickly and evenly (as described in the diagram below).
Find your center of gravity. If your weight is distributed correctly on
the foot mats and your center of gravity is level, you should be able
to stand on your Axle just as if you were standing on the ground.
On average, it takes 3-5 minutes just to get comfortable standing on
RIDING YOUR AXLE
Stay relaxed and step on quickly, confidently
and evenly. Imagine climbing stairs, one
foot, then the other. Look up once your feet
are even. The Axle may vibrate or spin in one
direction, if weight and pressure are applied
to only one foot mat. THIS IS NORMAL.
NOTES:
12
Advertisement
Table of Contents
