JVC KD-AR870 Instructions Manual page 80

Downloading (or deleting) files
• You can download a file only while selecting
"CD" for the playback source; on the other
hand, you can delete a file while selecting any
source.
• After finishing the procedure to download a
file, playback starts from the beginning.
• If you have already downloaded an animation,
downloading a new animation deletes the
previously stored animation.
• It takes a long time to download an
animation.
– About 3 to 4 seconds for a still image (one
frame).
– About 1 to 2 minutes for an animation of 30
frames.
– About 3 minutes for an animation of 60
frames.
• If you try to operate the downloading
procedure from a disc without any <jtl>,
<jtm>, <jta>, and <jtb> files, beeps sound.
• If you try to store more than 30 images
for each size "LARGE" and "SMALL,"
"Picture Full" appears and you cannot start
downloading. Delete unwanted files before
downloading.
• If the total frame number of an animation
downloaded exceeds 60, the frames exceeding
that number are ignored.
General settings—PSM
• "Auto" setting for "Dimmer" may not work
correctly on some vehicles, particularly on
those having a control dial for dimming. In
this case, change the "Dimmer" setting to any
other than "Auto."
• If "LCD Type" is set to "Auto," the display
pattern will change to the "Positive" or
"Negative" pattern depending on the
"Dimmer" setting.
• Changing the "Amp Gain" setting from
"High PWR" to "Low PWR" when the level
is set higher than "Volume 30," the unit
automatically changes the volume level to
"Volume 30."
30
All manuals and user guides at all-guides.com
Title assignment
• If you try to assign titles to more than 30
station frequencies or 30 discs, "Name
Full" appears. Delete unwanted titles before
assignment.
• Titles assigned to discs in the CD changer can
also be shown if you play back the disc from
the unit and vice versa.
Available characters on the display
Capital letters
Small letters
Numbers and symbols
iPod or D. player operations
• When you turn on this unit, the iPod or
D. player is charged through this unit.
• While the iPod or D. player is connected, all
operations from the iPod or D. player are
disabled. Perform all operations from this
unit.
• The text information may not be displayed
correctly.
– Some characters such as accented letters
cannot be shown correctly on the display.
– Depends on the condition of
communication between the iPod or
D. player and the unit.
• If the text information includes more than
8 characters, it scrolls on the display (see
also page 17). This unit can display up to 40
characters.