JVC KD-AR870 Instructions Manual page 44

Symptoms
• The iPod or D. player does not turn
on or does not work.
• Buttons do not work as intended.
• The sound is distorted.
• "Disconnect" appears on the display.
• Playback stops.
• No sound can be heard when
connecting an iPod nano.
• No sound can be heard.
• "Error 01" appears on the display
when connecting a D. player.
• "NO FILES" or "NO TRACK"
appears on the display.
• "Reset 01" – "Reset 07" appears on
the display.
• "Reset 08" appears on the display.
• The iPod's or D. player's controls do
not work after disconnecting from
this unit.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
• iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
44
All manuals and user guides at all-guides.com
• Check the connecting cable and its connection.
• Update the firmware version.
• Change the battery.
The functions of the buttons have been changed.
Press MODE before performing the operation.
Deactivate the equalizer either on the unit or the
iPod/D. player.
Check the connecting cable and its connection.
The headphones are disconnected during
playback. Restart the playback operation using
the control panel (see pages 32 and 33).
Disconnect the headphones from the iPod nano.
Disconnect the adapter from the D. player. Then,
connect it again.
No tracks are stored. Import tracks to the iPod or
D. player.
Disconnect the adapter from both the unit and
iPod/D. player. Then, connect it again.
Check the connection between the adapter and
this unit.
Reset the iPod or D. player.
Remedies/Causes