JVC KD-AR870 Instructions Manual page 255

ENGLISH
ELECTRICAL CONNECTIONS
A
Typical connections /
Before connecting:
Check the wiring in the vehicle carefully. Incorrect connection may cause serious
damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in color.
1
Connect the colored leads of the power cord in the order specified in the illustration below.
2
Connect the antenna cord.
3
Finally connect the wiring harness to the unit.
Antenna Connector
To subwoofer (see diagram
Rear ground terminal
Line out (see diagram )
To CD changer or another external component (see diagram
CD (
* 2
Before checking the operation of this unit prior to
installation, this lead must be connected, otherwise
power cannot be turned on.
*
2
White with black stripe
White
Left speaker (front)
KD-G825_010A.indd 3 KD-G825_010A.indd 3
All manuals and user guides at all-guides.com
)
)
15 A fuse
15 A
Black
)
* 2
Yellow
* 2
Red
Blue
Blue with white stripe
Orange with white stripe
Brown
Gray with black stripe Gray
Right speaker (front)
1
2
3
* 1
Not supplied for this unit.
* 1
To metallic body or chassis of the car
To a live terminal in the fuse block connecting to the car battery
(bypassing the ignition switch) (constant 12 V)
12 V
To an accessory terminal in the fuse block
To the automatic antenna if any (250 mA max.)
To the remote lead of other equipment (200 mA max.)
To car light control switch
To cellular phone system
Green with black Green
stripe
Left speaker (rear)
3
Ignition switch
Fuse block
250 mA
200 mA
Purple with black stripe Purple
Right speaker (rear)
12/19/05 4:16:52 PM 12/19/05 4:16:52 PM