Playing A Usb Memory - JVC KD-AR870 Instructions Manual

Playing a USB memory

This unit can play MP3/WMA tracks stored in a
USB memory.
All tracks in the USB memory will be played
repeatedly until you change the source.
• Removing the USB memory will also stop
playback.
~
Ÿ
If a USB memory has been attached...
Playback starts from where it has been stopped
previously.
• If a different USB memory is currently
attached, playback starts from the beginning.
To detach the USB memory, straightly pull it
out from the unit.
Cautions:
• Avoid using the USB memory if it might
hinder your safety driving.
• Make sure all the important data has been
backed up to avoid losing the data.
10
All manuals and user guides at all-guides.com
USB input terminal
USB memory
Track and folder information (CD/CD Text/
MP3/WMA/USB)
Once you insert a disc or attach a USB
memory, the total track number/total
playing time (for CD/CD Text) and total
folder number/total track number (for MP3/
WMA/USB) appears, then the following
information appears...
Ex.: When "CD-CH" is selected as the source
Current folder number*
2
Current disc number*
*
File type* 1 3
• For the audio CD or CD Text:
4
Disc name* and Track name*
• For the MP3/WMA/USB:
Folder name and File name, or
Album/performer*
• When playing CD changer, the total
numbers will not appear.
* 1 Displayed only when an MP3/WMA
track is played back.
* 2 Displayed only when "CD-CH" is selected
as the source.
* 3 Either MP3 or WMA indicator lights up
depending on the detected file.
* 4 Appears only for CD Texts and CDs if
it has been recorded or assigned. ("No
Name" appears if no name is recorded or
assigned.)
* 5 Appears only for CD Texts. ("No Name"
appears if no name is recorded.)
* 6 Appears only when "Tag" is set to "On"
(see page 18).
1
Elapsed playing time
Current track number
5
6 6
and Track name*