Dtc P0650 Mil Malfunction (Scan Diagnostics) - Briggs & Stratton VANGUARD M490000 Repair Manual

DTC P0650 MIL Malfunction (Scan Diagnostics)

Step
1 1. Select the Dashboard icon in the left sidebar to view
the Dealer tab.
2. Observe the Current codes display.
2
NOTE: A Current codes display can also be viewed under
the Troubleshooting tab.
3. Does the display indicate that a current code exists?
2 1. Disconnect MAP sensor connector, ignition coil connector, or
any other connector that will set a DTC. Start and run engine.
2. Does the Code(s) Current display indicate that a current code
exists?
3 Is MIL illuminated?
72
Action Yes
Go to step 3.
Go to step 3.
System OK. Go to DTC P0650 Non-
Scan Diagnostics.
No
Go to step 2.
-