Siruba NC008 Instruction Book page 20

調整針與勾針護針器的間隙
1. 勾針護針器 (A) 往右輕壓住針 (B)。( 圖 30)
送具護針片的調整
1. 送 具 護 針 片 (C) 和 針 (B) 的 左 右 方 向 間 隙 為
0.8~1mm。 送 具 護 針 片 (C) 最 前 緣 與 針 (B)
的最前緣齊平。( 圖 31)
P17
ADJUSTI NG CLEARANCE BETWEEN
NEEDLE AND NEEDLE GUARD
1.Adjustment should be made by pushing of
the needle guard (A) to the needle (B) at
0~0.05mm. (Fig 30)
A D J U S T I N G O F T H R E A D
RECEIVER
1.The clearance of left-right direction between
the needle (B) and the thread receiver (C) of
the feed dog (A) is 0.8~1.0mm. (Fig 31)
圖 30/Fig 30
圖 31/Fig 31