Tuning Into A Station; Setting The Sensitivity Of The Station Search Mode; Storing Stations - Blaupunkt BOLOGNA Bologna C51 Operating And Installation Instructions

In order to switch between memory
levels or wavebands, briefly press
the BND/TS button 5.
There are various methods available for

tuning into a station.

Press the or
The unit tunes into the next receivable
station.
You can also tune into stations manual-
ly.
Press either the
Note:
You can only tune into stations
manually if the RDS function has
first been deactivated.
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called "broadcasting
network".
Press the or
move to the next station on the
broadcasting network.
Note:
If you want to use this feature, the
RDS function must first be activat-
ed.
You will then only be able to switch to
stations that you have received once
already. To do so, use the Scan or Trav-
elstore function.
button :.
buttons :.
or
button : to
You can choose whether you wish to
preset only strong or also poor-recep-
tion stations.
Press the MENU button 8.
Press the or
edly until "SENS" appears on the
display.
button :.
Press the
The display shows the currently set val-
ue for sensitivity. "SENS HI6" denotes
maximum sensitivity. "SENS LO1" is the
minimum. If "SENS LO" is selected, "lo"
appears on the display.
buttons : to set the
Use the
desired degree of sensitivity.
When you have completed the set-
tings, press the MENU button 8
or the OK buttons ;.
Select the required FM memory
level, FM1, FM2, FMT or either
waveband MW or LW (MW and LW
are not available on the Düsseldorf
C51 and Kansas DJ51 units).
Tune into the desired station.
Hold down one of the preset sta-
tion buttons 1 - 6 > on which you
wish to store the station for more
than two seconds.
button : repeat-
35