Switching On/Off - Blaupunkt Canberra C31 Operating Instructions Manual

Blaupunkt radio/cassette operating instructions
Hide thumbs Also See for Canberra C31:
Table of Contents

Advertisement

There are various ways of switching the
unit on/off:
If the unit is correctly connected to the
vehicle's ignition and it was not switched
off using button @, it will switch on/off
simultaneously with the ignition.
You can also switch the unit on even if
the ignition is off:
To do so, press button @.
Note:
To protect the vehicle battery, the
unit will switch off automatically af-
ter one hour if the ignition is off.
Remove the control panel.
The unit switches off.
Attach the control panel again.
The unit switches on. The settings (ra-
dio, cassette, CD changer or AUX) that
were set before the unit was switched
off will be reactivated.
To switch the unit on, press button
@.
To switch the unit off, press button
@ for longer than two seconds.
The unit switches off.
30
If the unit is switched off and there is no
cassette inserted in the drive,
Gently insert the cassette with the
open side facing towards the right
into the drive until you feel some
resistance.
The cassette will be drawn automatically
into the drive.
You must not hinder or assist the drive
as it draws in the cassette.
The unit switches on. Cassette playback
begins.
@

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents