Advertisement
Available languages
Available languages
Check that all nuts, bolts and screws are
securely tightened in order to be sure that the
machine is in a safe working condition.
Frequently check the debris bag for signs of
wear and deformation.
Use only genuine accessories and spare parts.
For your own safety, replace worn or damaged
parts without delay.
Electric tools should be kept in a dry place
when not in use.
If the mains cable for this device is damaged, it
must be replaced by the manufacturer or its
after-sales service or similarly trained personnel
to avoid danger.
The tool can be plugged into any socket-outlet
(with 230 V AC) that is equipped with a 10A fuse
or higher.
The socket-outlet has to be safeguarded by
an earthleakage circuit breaker (e.l.c.b.). The
operating current must not exceed 30 mA.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety
regulations and instructions may result in an
electric shock, fire and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
EXPLANATION OF THE WARNING SIGNS ON
THE EQUIPMENT.
When working with the device,
wear eye and ear protection.
Wear protective gloves when
working with the device.
Wear sturdy shoes when working
with the device.
Read the instructions for use
before use!
Risk of injury due to flying parts!
Unplug the mains plug before
performing any maintenance!
Maintain a safety distance!
Risk of injury caused by rotating
machine parts!!
Do not subject the device to a
humid environment!.
Mulching rate – 10:1
2. ELECTRICAL INFORMATION
DOUBLE INSULATED
This machine is double insulated for additional
user protection. All exposed metal parts
are isolated from the internal metal motor
components with protective insulation.
WARNING:USE ONLY IDENTICAL
REPLACEMENT PARTS WHEN SERVICING
TO AVOID INJURY.
WARNING:DOUBLE INSULATION DOES NOT
TAKE THE PLACE OF NORMAL SAFETY
PRECAUTIONS WHEN OPERATING THIS
TOOL.
WARNING:TO AVOID ELECTROCAUTION
Use only identical replacement parts when
servicing a tool with double insulation. Servicing
should be performed by a qualified service
technician. Do not use power tools in wet or
damp area or expose them to rain.
GUIDELINES FOR USING EXTENSION
CORDS
Make sure your extension cord is in good
condition. When using an extension cord, be
sure to sue one heavy enough to carry the
current your product will draw. An undersized
cord will cause overheating. The type of
extension cords to be used shall not be lighter
than H05VV-F with normal cross-sectional area
not less than 0.75mm2.
Be sure your extension cord is properly wired
and in good condition. Always replace a
damaged extension cord or have it repaired by a
qualified electrician before using it. Protect your
extension cords from sharp objects, excessive
heat and damp or wet areas.
11
Advertisement
