Table of Contents
Advertisement
CHAPTER 5
5.1.6 Mounting connector onto target system
The connector must be mounted on the target system for connecting MINICUBE2 with the target system.
2.54 mm pitch 16-pin general-purpose connector can be used.
• HIF3FC-16PA-2.54DS (right-angle type, made by Hirose Electric Co., Ltd.)
• HIF3FC-16PA-2.54DSA (straight type, made by Hirose Electric Co., Ltd.)
• 7616-5002PL (right-angle type, made by Sumitomo 3M, Ltd.)
• 7616-6002PL (straight type, made by Sumitomo 3M, Ltd.)
Compact connectors and loose-wire cables are also available as options.
products, access the MINICUBE2 information site.
URL: http://www.necel.com/micro/english/product/sc/allflash/minicube2.html
Figure 5-12. 2.54 mm Pitch 16-Pin General-Purpose Connector Pin Layout
15
15
16
16
110
HOW TO USE MINICUBE2 WITH 78K0S MICROCONTROLLER
TOP VIEW
TOP VIEW
Pin 1
Pin 1
Target system
Target system
13
13
11
11
9
9
7
7
5
5
3
3
14
14
12
12
10
10
8
8
6
6
4
4
Pin assignment of target connector
Pin assignment of target connector
to be mounted on target system
to be mounted on target system
User's Manual U18371EJ1V0UM
The following products are recommended.
For more information on these
Pin assignment when MINICUBE2
Pin assignment when MINICUBE2
is connected in this direction
is connected in this direction
1
1
2
2
A
Advertisement
Table of Contents
