Notes Before Using Minicube2; Supported Devices - NEC QB-MINI2 User Manual

On-chip debug emulator with programming function
Table of Contents

Advertisement

1.2

Notes Before Using MINICUBE2

Chapters 1 and 2 present an overview and the basic specifications of MINICUBE2, and the following chapters
provide separate descriptions for the target devices and the purpose of use. To utilize this manual effectively,
refer to the following table and see the relevant chapter for your target device and purpose of use.
Target Device
V850
Target system design
On-chip debugging
Flash memory programming
78K0
Target system design
On-chip debugging
Flash memory programming
78K0S
Target system design
On-chip debugging
Flash memory programming
78K0R
Target system design
On-chip debugging
Flash memory programming
-
MINICUBE2 self-testing
-
Expansion of supported devices
1.3

Supported Devices

Access the following MINICUBE2 information site or refer to the document for details on the devices that
support debugging and flash programming with MINICUBE2. The document describes the development tools
that are required as the support conditions, serial interface and operating precautions, so be sure to read the
document, in addition to this manual.
• MINICUBE2 information site
URL: http://www.necel.com/micro/english/product/sc/allflash/minicube2.html
Remark This website just posts the supported target devices. For details on the development tools that are
required as the support conditions, refer to the document below.
• Document
Document name: QB-MINI2 Operating Precautions
CHAPTER 1
OVERVIEW
Table 1-1. Chapters Corresponding to Usage
Purpose of Use
CHAPTER 3 HOW TO USE MINICUBE2 WITH
V850 MICROCONTROLLER
3.1 Target System Design
3.2 On-Chip Debugging
3.3 Flash Programming
CHAPTER 4 HOW TO USE MINICUBE2 WITH
78K0 MICROCONTROLLER
4.1 Target System Design
4.2 On-Chip Debugging
4.3 Flash Programming
CHAPTER 5 HOW TO USE MINICUBE2 WITH
78K0S MICROCONTROLLER
5.1 Target System Design
5.2 On-Chip Debugging
5.3 Flash Programming
CHAPTER 6 HOW TO USE MINICUBE2 WITH
78K0R MICROCONTROLLER
6.1 Target System Design
6.2 On-Chip Debugging
6.3 Flash Programming
CHAPTER 7 SELF-TESTING
CHAPTER 8 FIRMWARE UPDATE
User's Manual U18371EJ1V0UM
Relevant Chapter
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Minicube2

Table of Contents