Advertisement
Quick Codes
The Tunstall Vi+ has a number of quick codes that can be entered into the series
telephone when the Vi+ is in programming mode
Quick
Code
2040
Reset to default but retain radio triggers
2050
Reset to factory defaults
2051
Reset unit
2060
Delete ALL radio triggers
3000
Delete the next radio trigger transmitted
31xx
Enables periodic calls (30 day) with
offset of xx hours
3100
Disables periodic calls
32xx
Configure pendant test reminder function
3300
Demonstrates the pendant test
reminder function
48xy
Set destination
51xx
Enable inactivity monitoring for a period
of 12 or 24 hours
9101
Make all event calls silent and visual
9108
Make all event calls silent and non-visual
9103
Restore all event calls to default states
3020
Announce date and time
Page 9
Programming the Vi+ using a Series Telephone
Purpose
Comments
Time and date remain unchanged
Time and date remain unchanged
Force unit to reset. All current
settings are retained.
Restores to default
Must activate trigger
Where XX is the number of days
betweenthe reminders, When XX is
set to 00 = the function is turned off
Unit plays spoken messages
Where x is telephone number 1 to
10 ( 0 = 10 ) y = 0 for CC, 1 for PR
and 2 for POTS
Where xx is 12 or 24
Alarm button will flash
Alarm button does not flash
Ver 1 4/24/2015
Advertisement
